JVC HR-S9800U manual Check contents Final preparation for use, Situate VCR, Connect VCR to TV

Page 7

 

 

 

 

EN 7

 

 

 

 

 

 

 

Check contents

 

Final preparation for use

 

1 Make sure the package contains all of the

5 Turn on the VCR and set the CH3-CH4 switch on the

 

accessories listed in “SPECIFICATIONS” ( pg.

 

rear (shown below) to either CH3 or CH4 correctly.

82).

 

 

The CH3–CH4 switch is preset to the CH3

 

 

 

 

position.

 

Situate VCR

 

Set to CH4 if CH3 is used for broadcasting in your

2 Place the VCR on a stable, horizontal surface.

 

area. (To view the picture from this VCR through

 

this channel, select the same channel on the TV

 

 

 

 

 

 

 

 

with the CH3–CH4 switch setting on the VCR.)

 

Connect VCR to TV

 

 

You can now perform basic playback ( pg.

3 The following connections are required.

 

 

23) or basic recording ( pg. 28).

 

 

 

 

 

 

 

RF Connection

 

 

 

1 Disconnect the TV antenna from the TV.

 

2 Connect the TV antenna cable to the

 

ANTENNA IN terminal on the rear of the VCR.

 

3 Connect the supplied RF cable between the TV

 

OUT terminal on the rear of the VCR and the

 

TV’s antenna input terminal.

 

AV Connection (improves picture quality during

TV OUT

tape playback.)

 

If your TV is equipped with audio/video input

 

connectors

Back of VCR

 

1Connect the antenna, VCR and TV as shown in

the illustration.

2 Connect an audio/video cable between the AUDIO/VIDEO OUT connectors on the rear of the VCR and the audio/video input connectors

on the TV.

NOTES:

 

 

S-video Connection

(allows you to make the

The VCR channel is the channel on which you can watch the

most of the S-VHS picture performance.)

picture from the VCR on the TV when only using the RF

If your TV is equipped with an S-video input

connection. The VCR’s CH3-CH4 switch, on the back of the

connector

VCR, sets the VCR channel to CH3 or CH4.

1 Perform “RF Connection” and “AV

Even if you are using audio/video cables to connect your VCR

Connection” above.

to your TV, you must also connect it using the RF cable. This

2 Connect an S-video cable between the S VIDEO

will ensure that you can record one show while watching

another (

pg. 31).

OUT connector on the rear of the VCR and the

For full identification of the VCR’s rear panel, refer to the

S-video input connector on the TV.

Index (

pg. 80).

 

 

4 Connect VCR to power source Connect the AC power plug to an AC outlet.

The clock and tuner channels will automatically be set when the antenna is connected and when the AC power cord is first connected to an AC power outlet ( pg. 8).

(If “Auto” or “CH” is displayed on the front display panel before the VCR is turned on, the clock and tuner channels are being set automatically. Wait until the clock time is displayed on the front display panel before turning on the VCR.)

Page 6 Page 8
Image 7
Page 6 Page 8
Contents HR-S9800U Telephone Number Dear CustomerGrounding or Polarization Power SourcesPower Cord Protection Power LinesReplacement Parts AccessoriesDamage Requiring Service CleaningContents Back of VCR Basic ConnectionsSituate VCR Check contents Final preparation for useConnect VCR to TV Auto Clock Set/Auto Tuner Set Plug & Play SettingPerform Plug & Play setup What to do if Plug & Play setting failedPress Menu Language SettingSelect language Return to normal screen10 EN Clock SettingAccess Main Menu screen Access Clock Set screenSelect host channel Setting clock semiautomaticallySelect D.S.T. mode Set Auto Clock to onSet year Setting clock manually12 EN Set timePerform Auto Channel Set Tuner SettingSetting channels automatically Access Tuner Set screenAdd or skip desired channels Setting channels manuallyAccess Manual Channel Set screen 14 ENPress the NumberCH 45 ADD Setting ghost reductionSelect a channel and set ghost reduction Mode What is a ghost?Installing Controller Cable Box Control Setting16 EN Turn on cable box Setting cable box output channel & brandAccess Main Menu screen on VCR Access Cable Box Set screenEnter cable box brand Access Cable Box Brand Set screen18 EN Select cable box output channelBrand Code Cable BOX Brand ListConnect Controller to VCR How to control the DBS receiver20 EN Connect DBS receiver to VCRDBS Receiver SET, then press OK or # Setting DBS receiver output channel & brandAccess DBS Receiver Set screen Turn on DBS receiver22 EN AccessPress OKDBS. Receiver Brand Set screenEnter DBS Receiver’s brand Load a cassette Basic PlaybackStart playback Checking tape position Basic Playback Features24 EN Changing display informationAutomatic operations after Adjusting tracking conditionPlaying back tape repeatedly Selecting monitor soundLocating beginning Locating beginning of timerAccess distant code 26 ENDigital TBC/NR Adjusting picture conditionSkipping unwanted portions Skip SearchSet tape speed Basic Recording28 EN Select recording channelPress Pause 8. To resume recording, press Play To fast-forward the tape when it is not runningTo pause recording To stop recording30 EN Basic Recording FeaturesSpecifying recording length Showing on-screen display Watching one program while recording anotherAdjust recording level Adjusting recording level32 EN Other useful functions for recording Record safety tabAccidental erasure prevention Rapidly Picture Search High-Speed Picture Search Special Effect Playback34 EN Locating particular sceneVariable-Speed Picture Search Viewing still picturePause during playback Advance or reverse still pictureOn the Remote During normal playback 36 ENViewing slow motion picture Slow Motion Playback Pro-SlowPlayback tape How to use the Shuttle ring on the RemoteTimeScan function Sounds reproduced by the TimeScan functionStop + VCR Plus+ Timer ProgramingAccess VCR Plus+ screen 38 ENSet tape speed Press SP/EP Engage timer recording standby modeTo use the VCR while it is in timer recording standby mode Input receiving channel number40 EN Changing VCR Plus+ SettingVCR Plus+ guide channel matching Input guide channel number Access Guide Channel Set screen42 EN Express Timer ProgramingTo timer-record daily Monday-Friday or weekly serials 44 EN Checking program settingsSelect program to modify Confirm overlapping programsProgram Select program Access Title screenNavigation Playback 46 ENDeactivate Video Navigation Deactivating Video NavigationEditing tape title Access Edit Title screenEditing Titles 48 ENEnter title How to enter the charactersEditing program title and category Select tape title3 D 2,3 Cancel50 EN Deleting tape informationDelete program information Deleting program informationChecking memory Check memoryFinding by tape number Access tape number screenFinding Tapes 52 ENConfirm tape number lists Finding by categoryFinding by recording date Conform tape number lists3,5 Access Find Title screen54 EN Finding by remaining timePosition Unrecorded portion Current tapeSelect Function Access Function Set screenChange setting 56 ENWhen this function is set to OFF When this function is set to onOFF For Example 58 ENHI-FI AV Compu Link 60 ENVideo Press REC Link Set timer program on DBS receiverEngage Satellite Auto Recording standby mode Make sure the record safety tab is intact62 EN Child LockReturn to normal screen Select Jlip ID Number Set screenSet Jlip ID Number To Jlip ID NO. SETVarious connection for editing tapes Edit From Camcorder64 EN ConnectionSet Picture Control to Edit Select input mode on this VCRMake connections Select video input terminalLoad cassettes Select edit modeEdit To Or From Another 66 ENTo stop audio dubbing Activate Audio Dubbing modeLocate start point Start audio dubbingAV Dubbing Source tape Edited tape 68 ENAnother VCR for playback Insert Editing Source tape Edited tapeStart editing Activate editing modePrepare tapes Locate end point70 EN TV Brand SettingOperate cable box Cable Box Brand SettingTurn on the cable box Enter cable box brand codeEnter DBS receiver brand code DBS Receiver Brand Setting72 EN Turn on the DBS receiverTurn on VCR Changing Remote Control CodeUnplug VCR Plug in VCR74 EN TroubleshootingCorrective Action Timer Recording76 EN About Head CleaningMoisture Condensation Recording Questions and answersTimer Recording PlaybackList of terms 78 EN$ % Front panelRemote PAUSE/AV Compulink terminal 80 ENRear panel On-screen displayRemote How to use the RemoteUsable cassettes TimerAccessories 82 ENNew Maple Avenue Pine Brook, NJ 781 954 65084 EN Limited WarrantyMemo 86 EN Page HR-S9800U
Top Page Image Contents