JVC HR-S9800U manual 26 EN, Locating beginning of timer, Start search, Access distant code

26 EN BASIC PLAYBACK AND RECORDING (cont.)

PLAY ( 3 )

J

G Locating beginning of

recordings — Index Search

Index codes are placed on the tape at the beginning of each recording when recording on this VCR. You can find and automatically play back from the beginning of any recording using the Index Search function.

1 Start search

TIME SCAN

SHUTTLE ring

VCR TV CABLE/DBS

While the tape is not running, press 4 or ¢ on the Remote.

2 Access distant code

To access a recording of 2 to 9 index codes away, press 4 or ¢ repeatedly until the correct number is displayed on the screen (only if “SUPERIMPOSE” is set to “ON” ; pg. 56, 57). Playback begins automatically when the desired recording is located.

PLAY ( 3 )

REW ( )

1 2 3

4 5 6

7 8 9

0

I

FF ( )

G

H

Beginning of the current			Current position			Beginning of the 2nd next
program recorded			on the tape			program recorded
Previous				Next
program				program	2nd	next
recorded				recorded
–2	–1	1			2	3

4 ¢

If you want to find the very beginning of the desired program, press REW ( ) or FF ( ) on the Remote or turn the TIME SCAN SHUTTLE ring on the front panel after playback starts.

NOTE:

An index code is not placed on the tape when recording is resumed from recording pause.

H Locating beginning of timer

recordings — Instant Review

At the press of a button, you can turn on the VCR, rewind the tape and begin to view the most recent timer- recorded program.

Press REVIEW on the Remote after ensuring that the VCR is in the timer recording standby mode.

The VCR turns on, and rewinds to the index code indicating the beginning of the last timer-recorded program, then begins playback automatically.

You can access a program of 2 to 9 index codes away from the current position on the tape. If, for example, you have 5 programs recorded and you want to watch the third one, press REVIEW three times.

If you want to find the very beginning of the desired program, press REW ( ) or FF ( ) on the Remote or turn the TIME SCAN SHUTTLE ring on the front panel after playback starts.

If the tape is already rewound when REVIEW is pressed, it will play the tape from the beginning. It will not fast-forward to an index code.

The Instant Review function will also operate if the VCR is turned on.