EN 15
What is a “ghost”?
Double images of a TV program, or a “ghost”, is a common problem with TV reception in urban areas. A broadcasting signal, reflected from some surfaces (building, mountain, etc.), arrives slightly later than the signals arriving directly from the TV station. This causes such ghosts as follows:
– Double images
– Faint images
–Distorted images
–Distorted colors
–Vertically jittered images
2
15
23
VCR TV CABLE/DBS
1 2 3
4 5 6 
4
7 8 9
0
4
2
15
23
Setting ghost reduction
This VCR is equipped with the ghost reduction function. It reduces the ghosts using a GCR (Ghost Canceller Reference) signal sent from a TV station. The ghost reduction mode can be set for each channel independently and manually.
NOTES:
Ghosts may not be reduced in the following cases:
–The broadcasting signal does not have a GCR signal.
–The antenna is not connected correctly.
–There are too many ghosts.
–The signal is reflecting from moving objects (airplane, etc.). The images on the screen may be distorted when tuning from one channel to another or the power is turned on while the ghost reduction function is activated.
1Access Main Menu screen
Press MENU.
2 Access Tuner Set screen
On the front panel:
Press CH5° to move the highlight bar (arrow) to “TUNER SET”, then press OK.
On the Remote:
Press %Þ to move the highlight bar (arrow) to “TUNER SET”, then press OK or #.
3 Access Manual Channel Set screen
On the front panel:
Press CH5° to move the highlight bar (arrow) to “MANUAL CHANNEL SET”, then press OK.
On the Remote:
Press %Þ to move the highlight bar (arrow) to “MANUAL CHANNEL SET”, then press OK or #.
4Select a channel and set ghost reduction
mode
On the Remote ONLY:
(CATV)
1 Press the NumberCH 45 ADD
GR STANDARD
keys or %Þ to input a channel number.
2 Press SP/EP (
) to select the desired ghost reduction mode. You have three choices: STANDARD – Normally select this
SOFT – Select when you prefer softer picture than when “STANDARD” is selected.
OFF– Select when neither “STANDARD” nor “SOFT” improves the picture.