JVC HR-S9800U manual Make connections, Select input mode on this VCR, Select video input terminal

Page 65

EN 65

You can use a camcorder as the playback VCR and your VCR as the recording VCR.

1 Make connections

Connect an audio/video cable between the camcorder’s audio/video output connectors and your VCR’s audio/video input connectors.

When the JVC camcorder is equipped with the Master Edit Control, you can control the VCR from the camcorder. Connect the mini-plug cable (not supplied with this VCR) as illustrated to the left.

When using a camcorder with a monaural output, connect the audio output connector on the camcorder to the left audio input connector on this VCR.

2 Load a cassette

Insert the cassette to be recorded on into this VCR (for recording).

3 Select input mode on this VCR

Select “L-1” — when connecting the camcorder to the audio/video input connectors on the rear panel.

Select “F-1” — when connecting the camcorder to the audio/video input connectors on the front panel.

On the front panel:

Press CH5°.

On the Remote:

Press the Number key “0 (AUX)” or CH +/–.

4Select video input terminal

Follow steps 1 to 4 described on pages 56.

When using S VIDEO terminal, set “FRONT AUX INPUT” (or “REAR AUX INPUT” if you use the connectors on the rear) to “S-VIDEO”.

When using VIDEO terminal, set “FRONT AUX INPUT” (or “REAR AUX INPUT”) to “VIDEO”.

5Set “PICTURE CONTROL” to “EDIT”

Follow steps 3 and 4 described on pages 56.

If your camcorder is a JVC Master Edit Control- equipped type — go to step 6.

If your camcorder is NOT a JVC Master Edit Control-equipped type — go to step 7.

6Set “AV COMPU-LINK” to “OFF”

Follow steps 3 and 4 described on pages 56.

The REMOTE PAUSE/AV COMPULINK connector works as the Remote Pause connector when “AV COMPU-LINK” is set to “OFF”.

7Return to normal screen

Press MENU.

8Start playback

Press PLAY ( 3 ) on the camcorder.

NOTE:

If the camcorder is equipped with a superimpose/OSD disable feature then set it to “OFF” before starting playback.

9Start recording

On the front panel:

Press REC ( ƒ ).

On the Remote:

Press REC ( ƒ ) and PLAY ( 3 ) at the same time.

If you are using a Master Edit Control-equipped JVC camcorder, recording starts automatically on this VCR. (Refer to camcorder’s instruction manual.)

NOTE:

Be sure to select “AUTO” for “PICTURE CONTROL” (or “NORM” when “VIDEO CALIBRATION” is set to “OFF”) after you finish dubbing the tapes ( pg. 56 and 57).

Page 64 Page 66
Image 65
Page 64 Page 66
Contents HR-S9800U Telephone Number Dear CustomerPower Cord Protection Power SourcesPower Lines Grounding or PolarizationDamage Requiring Service AccessoriesCleaning Replacement PartsContents Back of VCR Basic ConnectionsConnect VCR to TV Check contents Final preparation for useSituate VCR Perform Plug & Play setup Plug & Play SettingWhat to do if Plug & Play setting failed Auto Clock Set/Auto Tuner SetSelect language Language SettingReturn to normal screen Press MenuAccess Main Menu screen Clock SettingAccess Clock Set screen 10 ENSelect D.S.T. mode Setting clock semiautomaticallySet Auto Clock to on Select host channel12 EN Setting clock manuallySet time Set yearSetting channels automatically Tuner SettingAccess Tuner Set screen Perform Auto Channel SetAccess Manual Channel Set screen Setting channels manually14 EN Add or skip desired channelsSelect a channel and set ghost reduction Mode Setting ghost reductionWhat is a ghost? Press the NumberCH 45 ADD16 EN Cable Box Control SettingInstalling Controller Access Main Menu screen on VCR Setting cable box output channel & brandAccess Cable Box Set screen Turn on cable box18 EN Access Cable Box Brand Set screenSelect cable box output channel Enter cable box brandBrand Code Cable BOX Brand List20 EN How to control the DBS receiverConnect DBS receiver to VCR Connect Controller to VCRAccess DBS Receiver Set screen Setting DBS receiver output channel & brandTurn on DBS receiver DBS Receiver SET, then press OK or #Enter DBS Receiver’s brand AccessPress OKDBS. Receiver Brand Set screen22 EN Start playback Basic PlaybackLoad a cassette 24 EN Basic Playback FeaturesChanging display information Checking tape positionPlaying back tape repeatedly Adjusting tracking conditionSelecting monitor sound Automatic operations afterAccess distant code Locating beginning of timer26 EN Locating beginningSkipping unwanted portions Adjusting picture conditionSkip Search Digital TBC/NR28 EN Basic RecordingSelect recording channel Set tape speedTo pause recording To fast-forward the tape when it is not runningTo stop recording Press Pause 8. To resume recording, press PlaySpecifying recording length Basic Recording Features30 EN Showing on-screen display Watching one program while recording another32 EN Adjusting recording levelAdjust recording level Accidental erasure prevention Record safety tabOther useful functions for recording 34 EN Special Effect PlaybackLocating particular scene Rapidly Picture Search High-Speed Picture SearchPause during playback Viewing still pictureAdvance or reverse still picture Variable-Speed Picture SearchViewing slow motion picture 36 ENSlow Motion Playback Pro-Slow On the Remote During normal playbackTimeScan function How to use the Shuttle ring on the RemoteSounds reproduced by the TimeScan function Playback tapeAccess VCR Plus+ screen VCR Plus+ Timer Programing38 EN Stop +To use the VCR while it is in timer recording standby mode Engage timer recording standby modeInput receiving channel number Set tape speed Press SP/EPVCR Plus+ guide channel matching Changing VCR Plus+ Setting40 EN Input guide channel number Access Guide Channel Set screen42 EN Express Timer ProgramingTo timer-record daily Monday-Friday or weekly serials 44 EN Checking program settingsProgram Confirm overlapping programsSelect program to modify Navigation Playback Access Title screen46 EN Select programDeactivate Video Navigation Deactivating Video NavigationEditing Titles Access Edit Title screen48 EN Editing tape titleEditing program title and category How to enter the charactersSelect tape title Enter title50 EN CancelDeleting tape information 3 D 2,3Checking memory Deleting program informationCheck memory Delete program informationFinding Tapes Access tape number screen52 EN Finding by tape numberFinding by recording date Finding by categoryConform tape number lists Confirm tape number lists54 EN Access Find Title screenFinding by remaining time 3,5Position Unrecorded portion Current tapeChange setting Access Function Set screen56 EN Select FunctionOFF When this function is set to onWhen this function is set to OFF For Example 58 ENHI-FI Video 60 ENAV Compu Link Engage Satellite Auto Recording standby mode Set timer program on DBS receiverMake sure the record safety tab is intact Press REC Link62 EN Child LockSet Jlip ID Number Select Jlip ID Number Set screenTo Jlip ID NO. SET Return to normal screen64 EN Edit From CamcorderConnection Various connection for editing tapesMake connections Select input mode on this VCRSelect video input terminal Set Picture Control to EditEdit To Or From Another Select edit mode66 EN Load cassettesLocate start point Activate Audio Dubbing modeStart audio dubbing To stop audio dubbingAnother VCR for playback 68 ENInsert Editing Source tape Edited tape AV Dubbing Source tape Edited tapePrepare tapes Activate editing modeLocate end point Start editing70 EN TV Brand SettingTurn on the cable box Cable Box Brand SettingEnter cable box brand code Operate cable box72 EN DBS Receiver Brand SettingTurn on the DBS receiver Enter DBS receiver brand codeUnplug VCR Changing Remote Control CodePlug in VCR Turn on VCR74 EN TroubleshootingCorrective Action Timer RecordingMoisture Condensation About Head Cleaning76 EN Timer Recording Questions and answersPlayback RecordingList of terms 78 EN$ % Front panelRear panel 80 ENOn-screen display Remote PAUSE/AV Compulink terminalRemote How to use the RemoteAccessories Timer82 EN Usable cassettesNew Maple Avenue Pine Brook, NJ 781 954 65084 EN Limited WarrantyMemo 86 EN Page HR-S9800U
Top Page Image Contents