JVC HR-S7900U To timer-record daily Monday-Friday or weekly serials, PressDAILYM-F, Catv, Dbs

Page 35
PROGRAM 1

EN 35

8 Set tape speed

Press SP/EP to set the tape speed.

9Return to normal screen

Press PROG. or OK.

“PROGRAM COMPLETED” appears on the screen for about 5 seconds, then normal screen appears.

•If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made.

The Program Check screen appears and conflicting programs will start blinking.

You can now correct the conflicting programs. See “When programs overlap each other” on page 38.

0Engage timer recording standby mode

Press TIMER .

The VCR turns off automatically and “ä” is displayed on the front display panel.

NOTES:

●Even if a power failure occurs, the VCR keeps your timer programs. However, the clock time, channel settings, and other menu settings are lost if it lasts for more than 3 minutes. As a result, when the power is supplied again to this VCR after the power failure, the following will take place.

1.This VCR starts the Plug & Play setting automatically to restore the clock time and channel setting.

2.If the clock time and channel setting are restored correctly, each timer program you have made will start at its start time unless its end time has elapsed.

●Programs that start after midnight must have the next day’s date.

●After timer recording is completed, the VCR turns off automatically.

●You can program the timer recording while a regular recording is in progress; the menu screens will not be recorded.

●To timer-record cable or satellite channels, be sure to keep the cable box or DBS receiver turned on.

To timer-record daily (Monday–Friday) or weekly serials

PressDAILY(M-F)

(number“8”)orWEEKLY

(number

“9”) anytime during steps 3 through 9.

 

“DAILY” or “WEEKLY” appears on the Program screen.

●Pressing the button again makes the corresponding indication disappear.

To use the VCR while it is in timer recording standby mode

Press TIMER to cancel the timer recording standby mode, then press POWERto turn on the VCR.

DO NOT forget to put the VCR into timer recording standby mode again by pressing TIMER after you use the VCR; otherwise, you cannot record the broadcast you want.

●When “AUTO TIMER” (☞pg. 40) is set to “ON”, the timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. You do not have to press TIMER to engage or disengage the timer recording standby mode.

ATTENTION FOR DBS RECEIVER USERS

If you are using a DBS receiver (unless “DBS

RECEIVER SET” is set to

 

START

STOP

 

8:00AM

 

=

 

9:00PM

 

 

“OFF” ☞pg. 19), the band

 

DATE

 

 

 

CH

 

 

 

12/24/00

 

 

 

110

 

SP

 

 

 

indication (TV, CATV or

 

 

 

 

 

 

 

SUN

 

 

 

DBS

 

 

 

DBS) appears under the

PRESS (+/–, SP/EP, 8=DAILY,

 

 

9=WEEKLY, 7=DBS), THEN (0K)

 

channel number

PRESS (PROG.) TO END

 

 

 

 

 

 

 

 

 

 

 

 

indication.

 

 

 

 

 

 

 

 

 

 

 

TV

:To timer-record a regular TV broadcast

 

received on the VCR.

 

 

 

 

 

 

 

 

 

 

 

CATV

:To timer-record a cable TV broadcast

 

received on the VCR, or through a cable box

 

(unless “CABLE BOX SET” is set to “OFF” ☞

 

pg. 16).

 

 

 

 

 

 

 

 

 

 

 

DBS

:To timer-record a satellite broadcast

 

received through a DBS receiver.

 

 

 

 

 

 

NOTE:

If “BAND” is set to “TV” on the Tuner Set screen

(☞Ê pg.Ê 13) and “CABLE BOX SET” is set to “OFF” on the Cable Box Set screen (☞Ê pg.Ê 16), “CATV” will not be displayed on the Program screen; If “BAND” is set to “CATV” or “CABLE BOX SET” is set to “ON”, “TV” will not be displayed.

If the channel number entered requires that the band be set, “7=DBS” is displayed on the screen.

If this happens, press the Number key “7 (DBS) ” to select “DBS”.

Page 34 Page 36
Image 35
Page 34 Page 36
Contents HR-S7900U Telephone Number Dear CustomerGrounding or Polarization Power SourcesPower Lines Power Cord ProtectionReplacement Parts AccessoriesDamage Requiring Service CleaningContents Video OUT Basic ConnectionsAudio OUT Set VCR channel Check contentsSituate VCR Connect VCR to TVClock and tuner channels will be set automatically Plug & Play SettingPerform Plug & Play setup What to do if Plug & Play setting failedSelect language Language SettingAccess Main Menu screen Access Initial Set screenSelect clock set Clock Setting10 EN PreparationsSelect host channel Setting clock semiautomaticallySelect D.S.T. mode Set Auto Clock to onTo make corrections any time during the process Setting clock manually12 EN #.Set timeAutomatically Auto Channel Set Tuner SettingAccess Tuner Set screen Perform Auto Channel SetManual Channel Set Access Manual Channel Set screen14 EN Add or skip desired channelsConnect cable box to VCR Cable Box Control SettingSituate Controller Attach ControllerSelect cable box output channel Access Main Menu screen on VCRAccess Cable Box Set screen 16 ENCable BOX Brand List AccessPress OKCable. Box Brand Set screenIf the cable boxs channel does not change to Connect Controller to VCR How to control the DBS receiver18 EN Connect DBS receiver to VCRDBS Receiver SET Access DBS Receiver Set screenTurn on DBS receiver Select DBS receiver output channelEnter DBS Receiver’s brand AccessPress OKDBS. Receiver Brand Set screen20 EN Start playback Basic PlaybackLoad a cassette Checking tape position Basic Playback Features22 EN Changing display informationLocating beginning Adjusting tracking conditionSelecting monitor sound Automatic operations afterRecordings Instant Review Locating beginning of timerAdjusting picture condition 24 ENStart recording Basic RecordingSelect recording channel Set tape speedWatching one program while recording another Basic Recording Features26 EN Specifying recording lengthOther useful functions for recording Showing on-screen displayDisplay VCR status on TV screen Exit on-screen displayRapidly Picture Search High-Speed Picture Search Special Effect Playback28 EN Locating particular sceneViewing slow motion picture Viewing still pictureSkipping unwanted portions Enter PlusCode number VCR Plus+ Timer ProgramingDaily Cancel 30 ENOr Weekly number 9. Daily or Engage timer recording standby modeTo use the VCR while it is in timer recording standby mode Input receiving channel numberVCRPlus+guidechannelmatching Changing VCR Plus+ Setting32 EN Guide Channel Input guide channel numberPlus # Shuttleplus34 EN Express Timer ProgramingDBS To timer-record daily Monday-Friday or weekly serialsPressDAILYM-F Catv36 EN Access 24HR quick program displayTimer warning display 24HR QuickChecking program settings Select program to modify 38 ENConfirm overlapping programs Select Function Useful Function SettingsAccess Function Set screen Change settingWhen this function is set to OFF When this function is set to onHi-Fi tracks. The main audio is not recorded Entire program while timer-recording in SP modeWhen stopping playback For ExampleBy selecting either HI-FI L or HI-FI R Mode is used for recording on S-VHS tapesBy connecting other JVC’s AV Compulink components see AV Compulink connectors becomes possibleAV Compulink AV Compu LinkVCR only OUT44 EN Set timer program on DBS receiverEngage Satellite Auto Recording standby mode Make sure the record safety tab is intactChild Lock Camcorder Edit From Camcorder46 EN Various connection for editing tapesSet Picture Control to Edit Select input mode on this VCRMake connections Select video input terminalConnection Edit To Or From Another48 EN Start audio dubbing Select input modeAudio Dubbing Locate start pointInsert Editing Source tape Edited tape 50 ENAudio Svideo Another VCR for playbackTo stop editing any time during recording Prepare tapesStart editing Locate end pointSet TV brand code TV Brand Setting52 EN Turn on the TVOperate cable box Cable Box Brand SettingTurn on the cable box Enter cable box brand codeEnter DBS receiver brand code DBS Receiver Brand Setting54 EN Turn on the DBS receiverEx. To set Remote to B code Changing Remote Control CodeSet remote control code for Remote To control two VCRs with the same Remote56 EN TroubleshootingTimer Recording Moisture Condensation 58 ENRecording Timer RecordingPlayback Can the VCR indefinitely remain in still mode?List of terms 60 ENFront panel PowerFront display panel 62 ENOn-screen display Rear panelRemote How to use the Remote64 EN Usable cassettes 66 EN HOW to Locate Your JVC Service CenterLimited Warranty HR-S7900U
Top Page Image Contents