JVC HR-S7900U manual Make connections, Select input mode on this VCR, Select video input terminal

Page 47

EN 47

You can use a camcorder as the playback VCR and your VCR as the recording VCR

1 Make connections

Connect an audio/video cable between the camcorder’s audio/video output connectors and your VCR’s audio/video input connectors.

●When the JVC camcorder is equipped with the Master Edit Control, you can control the VCR from the camcorder. Connect the mini-plug cable (not supplied with this VCR) as illustrated to the left.

●When using a camcorder with a monaural output, connect the audio output connector on the camcorder to the left audio input connector on this VCR.

2 Load a cassette

Insert the cassette to be recorded on into this VCR (for recording).

3 Select input mode on this VCR

Select “L-1” — when connecting the camcorder to the audio/video input connectors on the rear panel.

Select “F-1” — when connecting the camcorder to the audio/video input connectors on the front panel.

On the front panel:

Push the JOG dial, then turn it to the left or right.

On the Remote:

Press the Number key "0 (AUX)" and/or CH +/–.

4 Select video input terminal

Follow the procedure described on pages 39 and 43.

When using S VIDEO terminal, set “FRONT AUX INPUT” (or “REAR AUX INPUT” if you use the connectors on the rear) to “S-VIDEO”.

When using VIDEO terminal, set “FRONT AUX INPUT” (or “REAR AUX INPUT”) to “VIDEO”.

5Set “PICTURE CONTROL” to “EDIT”

Follow the procedure described on pages 39 and 40.

If your camcorder is a JVC Master Edit Control- equipped type — go to step 6.

If your camcorder is NOT a JVC Master Edit Control-equipped type — go to step 7.

6Set “AV COMPU-LINK” to “OFF”

Follow the procedure described on pages 39 and 42.

●The REMOTE PAUSE/AV COMPU-LINK connector works as the Remote Pause connector when “AV COMPU-LINK” is set to “OFF”.

7Return to normal screen

Press MENU.

8StartSet theplaybackcamcorder to its play mode.

NOTE:

If the camcorder is equipped with a superimpose/OSD disable feature then set it to “OFF” before starting playback.

9Start recording

On the front panel:

Press REC ( ¦ ).

On the Remote:

Press REC ( ¦ ) and PLAY ( 3 ) at the same time.

●If you are using a Master Edit Control-equipped JVC camcorder, recording starts automatically on this VCR. (Refer to camcorder’s instruction manual.)

NOTE:

Be sure to select “AUTO” for “PICTURE CONTROL” (or “NORM” when “VIDEO CALIBRATION” is set to “OFF”) after you finish dubbing the tapes (☞ pg. 39 and 40).

Page 46 Page 48
Image 47
Page 46 Page 48
Contents HR-S7900U Telephone Number Dear CustomerGrounding or Polarization Power SourcesPower Lines Power Cord ProtectionReplacement Parts AccessoriesDamage Requiring Service CleaningContents Video OUT Basic ConnectionsAudio OUT Set VCR channel Check contentsSituate VCR Connect VCR to TVClock and tuner channels will be set automatically Plug & Play SettingPerform Plug & Play setup What to do if Plug & Play setting failedSelect language Language SettingAccess Main Menu screen Access Initial Set screenSelect clock set Clock Setting10 EN PreparationsSelect host channel Setting clock semiautomaticallySelect D.S.T. mode Set Auto Clock to onTo make corrections any time during the process Setting clock manually12 EN #.Set timeAutomatically Auto Channel Set Tuner SettingAccess Tuner Set screen Perform Auto Channel SetManual Channel Set Access Manual Channel Set screen14 EN Add or skip desired channelsConnect cable box to VCR Cable Box Control SettingSituate Controller Attach ControllerSelect cable box output channel Access Main Menu screen on VCRAccess Cable Box Set screen 16 ENCable BOX Brand List AccessPress OKCable. Box Brand Set screenIf the cable boxs channel does not change to Connect Controller to VCR How to control the DBS receiver18 EN Connect DBS receiver to VCRDBS Receiver SET Access DBS Receiver Set screenTurn on DBS receiver Select DBS receiver output channelEnter DBS Receiver’s brand AccessPress OKDBS. Receiver Brand Set screen20 EN Start playback Basic PlaybackLoad a cassette Checking tape position Basic Playback Features22 EN Changing display informationLocating beginning Adjusting tracking conditionSelecting monitor sound Automatic operations afterRecordings Instant Review Locating beginning of timerAdjusting picture condition 24 ENStart recording Basic RecordingSelect recording channel Set tape speedWatching one program while recording another Basic Recording Features26 EN Specifying recording lengthOther useful functions for recording Showing on-screen displayDisplay VCR status on TV screen Exit on-screen displayRapidly Picture Search High-Speed Picture Search Special Effect Playback28 EN Locating particular sceneViewing slow motion picture Viewing still pictureSkipping unwanted portions Enter PlusCode number VCR Plus+ Timer ProgramingDaily Cancel 30 ENOr Weekly number 9. Daily or Engage timer recording standby modeTo use the VCR while it is in timer recording standby mode Input receiving channel numberVCRPlus+guidechannelmatching Changing VCR Plus+ Setting32 EN Guide Channel Input guide channel numberPlus # Shuttleplus34 EN Express Timer ProgramingDBS To timer-record daily Monday-Friday or weekly serialsPressDAILYM-F Catv36 EN Access 24HR quick program displayTimer warning display 24HR QuickChecking program settings Select program to modify 38 ENConfirm overlapping programs Select Function Useful Function SettingsAccess Function Set screen Change settingWhen this function is set to OFF When this function is set to onHi-Fi tracks. The main audio is not recorded Entire program while timer-recording in SP modeWhen stopping playback For ExampleBy selecting either HI-FI L or HI-FI R Mode is used for recording on S-VHS tapesBy connecting other JVC’s AV Compulink components see AV Compulink connectors becomes possibleAV Compulink AV Compu LinkVCR only OUT44 EN Set timer program on DBS receiverEngage Satellite Auto Recording standby mode Make sure the record safety tab is intactChild Lock Camcorder Edit From Camcorder46 EN Various connection for editing tapesSet Picture Control to Edit Select input mode on this VCRMake connections Select video input terminalConnection Edit To Or From Another48 EN Start audio dubbing Select input modeAudio Dubbing Locate start pointInsert Editing Source tape Edited tape 50 ENAudio Svideo Another VCR for playbackTo stop editing any time during recording Prepare tapesStart editing Locate end pointSet TV brand code TV Brand Setting52 EN Turn on the TVOperate cable box Cable Box Brand SettingTurn on the cable box Enter cable box brand codeEnter DBS receiver brand code DBS Receiver Brand Setting54 EN Turn on the DBS receiverEx. To set Remote to B code Changing Remote Control CodeSet remote control code for Remote To control two VCRs with the same Remote56 EN TroubleshootingTimer Recording Moisture Condensation 58 ENRecording Timer RecordingPlayback Can the VCR indefinitely remain in still mode?List of terms 60 ENFront panel PowerFront display panel 62 ENOn-screen display Rear panelRemote How to use the Remote64 EN Usable cassettes 66 EN HOW to Locate Your JVC Service CenterLimited Warranty HR-S7900U
Top Page Image Contents