42 EN |
| OTHER USEFUL FUNCTIONS (cont.) | |
|
| * The default setting is bold in the table below. | |
⬛ AUDIO MONITOR | This VCR can record two sound tracks simultaneously (normal and Hi- | ||
| Normally select this. | Fi) on a tape. | |
You can select the sound track(s) to listen to while playing back a | |||
| |||
| stereo tape. | ||
| back. | ||
| In addition, when playing back a prerecorded tape containing two | ||
separate audio programs on the | |||
| channel is played back. | ||
| by selecting either | ||
| |||
| channel is played back. | NOTES: | |
NORM: Sound on the normal track | |||
| is played back. | ● While playing back a monaural tape, sounds on the normal track will be heard | |
MIX: | Both sounds on the | regardless of this setting. | |
| track and normal track are | ● If RF connection (☞ pg. 7) is used for viewing pictures on the TV, sound will be | |
| monaural even though you select | ||
| mixed and played back. | ||
| ● You can also use the A. MONITOR button on the Remote to select the desired | ||
|
| ||
|
| monitor sound. (☞ pg. 23) | |
|
| ||
⬛ | You can determine which recording mode — either | ||
ON |
| mode — is used for recording on | |
|
| ||
OFF |
| When this function is set to “ON”, you can record on | |
|
|
| |
|
| When this function is set to “OFF”, you can record on | |
|
| VHS picture quality. | |
|
| NOTES: | |
|
| • | |
|
| resolution of 400 lines, comparing with the 230 lines of resolution of | |
|
| conventional VHS recordings. To achieve the highest quality picture we | |
|
| recommended to record in | |
|
| VHS VCR without SQPB cannot play back | |
|
| mode.) | |
|
| • | |
|
| VHS tapes is always performed in VHS mode except when using | |
|
| mode (☞ pg. 43). | |
|
| ||
⬛ AV | The REMOTE PAUSE/AV COMPULINK terminal on the rear panel can be used | ||
ON |
| as either the REMOTE PAUSE terminal or the AV COMPULINK terminal. | |
|
| ||
OFF |
| When this function is set to “ON”, you can use this terminal as the AV | |
|
| COMPULINK terminal. | |
|
| By connecting other JVC’s AV COMPULINK components (see the | |
|
| diagram on pageÊ 43), including amplifiers (or receivers) and televisions, | |
|
| one touch control of the audio and video components linked via their | |
|
| AV COMPULINK connectors becomes possible. | |
|
| For example: simply load a cassette in the VCR and press PLAY ( 3 ) and the | |
|
| AV COMPULINK components automatically turn on, the TV’s AV mode is | |
|
| selected and the VCR starts playback. (You do not have to press PLAY ( 3 ) if | |
|
| the cassette’s record safety tab is removed.) | |
|
| When this function is set to “OFF”, you can use this terminal as the | |
|
| REMOTE PAUSE terminal. (☞ pg. 47) | |
|
| NOTE: | |
|
| Connection varies depending on the type of JVC TV you have. Refer to the TV’s | |
|
| instruction manual when making this connection. | |
|
| CONTINUED ON NEXT PAGE \ | |
|
|
| |
|
| Refer to page 39 for setting procedures. |