JVC HR-S7500U manual Turn on DBS Receiver, Select DBS Receiver

20EN

INITIALSETTINGS(cont.)

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

Set DBS Receiver Output

Channel & DBS Receiver

Brand

POWER MENU

POWER MENU

CH

– +

OK

JOG

SHUTTLE

	TURN ON DBS RECEIVER
	Select a channel other than channel 55, 100 or 205 on
1 your DBS receiver.
2	TURN ON THE VCR
	Press POWER.
	● Set the VCR to the channel (3 or 4 or F-1 or L-1) on
	which the signals from the DBS receiver are received.
	ACCESS MAIN MENU
	SCREEN
3 Press MENU.

POWER

1 2 3

2

4 5 6

7 8 9

0 4

1

3 OK

MENU

TIME SCAN

	ACCESS INITIAL SET
4	SCREEN
	Press CH5° or TIME SCAN %Þ to move the highlight
	bar (arrow) to “INITIAL SET”, then press OK or TIME
	SCAN #.
	ACCESS DBS RECEIVER SET
	SCREEN
	Press CH5°or TIME		INITIAL SET
	SCAN %Þ to move the
5 highlight bar (arrow) to		CLOCK SET
		LANGUAGE ENGLISH
	“DBS RECEIVER SET”, then	GUIDE CHANNEL SET
	press OK or TIME SCAN #.	CABLE BOX SET
		=DBS RECEIVER SET
		SELECT WITH (5,°) AND (OK)
		PRESS (MENU) TO END
	SELECT DBS RECEIVER
6	OUTPUT CHANNEL
	Your selection depends on	DBS RECEIVER SET
	how your DBS receiver is
	connected to your VCR.
			OFF
	If your DBS receiver is
	connected to your VCR
	using an RF connection . . .
	. . . press CH 5° or TIME	PRESS (5,°), THEN (OK)
	SCAN %Þ until the	PRESS (MENU) TO END
	channel number
	representing the DBS receiver's output (CH3 – CH4)
	appears on the screen.
	If your DBS receiver is connected to your VCR's
	FRONT AUDIO/VIDEO IN connectors . . .
	. . . press CH 5° or TIME SCAN %Þ until "ON F-1
	(FRONT)" appears on the screen.
	If your DBS receiver is connected to your VCR’s REAR
	AUDIO/VIDEO IN connectors . . .
	. . . press CH 5° or TIME SCAN %Þ until "ON L-1
	(REAR)" appears on the screen.