JVC HR-S7500U manual Commercial Advance works as follows

Page 32
MARKING COMMERCIALS

32EN

PLAYBACKANDRECORDINGFEATURES(cont.)

Commercial Advance

Your VCR is eqipped with the Commercial Advance feature, which can automatically fast-motion the tape during playback to skip over previously recorded TV commercials.

Commercial Advance works as follows:

1When recording is finished, the following display will appear on the screen and the VCR's front display panel.

MARKING COMMERCIALS

WILL BE EXECUTED.

 

* In case of timer recording, these

 

displays will appear when all the preset

 

programs are recorded. If you press

PRESS (OK) TO START

TIMER to disengage the timer mode,

PRESS (STOP) TO CANCEL

these displays will appear even if all

 

the programs are not recorded yet.

NOTE:

Commercials can only be marked if Commercial Advance Record is enabled (☞ pg. 33).

a– Press OK and step 2 will take place.

b– If you do not want to use Commercial Advance for the recorded program, press STOP.

c– If neither button is pressed within 60 seconds after the displays appear, step 2 will take place automatically.

IMPORTANT

If you press STOP in this step or stop marking midway in step

2before the VCR is finished marking the commercials, data

necessary for Commercial Advance will be lost and this feature will not work with the recording you made.

2The VCR rewinds the tape automatically to the beginning of the recording and seeks out the commercial groups which have been detected.

During search and marking

Search and marking

Program

Commercial Commercial Commercial

Program

*If you want to stop marking midway, press STOP so that "MARKING IN PROCESS" appears on the screen and "CA" blinks on the front display panel. While those are displayed (for 5 seconds), press STOP again to cancel

Commercial Advance marking of the rest of the recordings.

*If you want to watch a TV program while the VCR is marking commercials, first press TV/VCR on the remote control, then use the TV's channel selector to select the channel you want to watch.

 

 

Commercial group

 

 

MARK

MARK

After having marked the start and end of all commercial groups of the recording(s), the VCR goes to its Stop mode. In the case of timer recording or Instant Timer Recording, the VCR shuts off automatically.

3During playback, the VCR automatically (when enabled ☞ pg. 33) fast-motions (with blueback screen) during the commercial groups that were marked in step 2.

* When Commercial Advance is forwarding the tape to skip over commercials, "CA SKIP" will be displayed in the top right corner of the TV screen.

Playback

 

Forward fast-motion playback

Playback

 

(with blueback screen)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Program

 

Commercial

Commercial

Commercial

Program

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Commercial group

 

 

 

 

 

 

 

MARK

MARK

 

 

 

 

NOTES:

●The Commercial Advance Record processes marks the tape when the picture fades to black and the audio fades to silence. Normally there is a period of black and no audio at the beginning and end of commercials.

●A black screen or a scene with no audio signal during a program may be detected as the start or end of a commercial.

●When using the timer to record two adjacent shows on the same channel, better commercial detection accuracy can be obtained by programming each show separately.

●If you record over a commercial start or end mark the Commercial Advance feature will not work correctly.

●Commercial Advance tested with 6 hours recordings, longer recordings may be possible depending on the number of commercials contained in the broadcast.

●The VCR will resume normal playback after skipping 15 minutes of tape if no commercial group end mark is detected.

●If the end of the tape is reached during recording, the display as illustrated in step 1 appears, then...

•in the case of timer recording or Instant Timer Recording, after step 2 takes place, the cassette will be ejected and the power will shut off.

•in the case of normal recording, after step 2 takes place, the VCR will rewind to the beginning of the tape.

●During automatic commercial skipping, if the user presses STOP or PLAY, the VCR will resume normal play; furthermore, if the tape is reversed to before the commercial group and played, the commercial group will not automatically be skipped.

●If an index code or the end of a recording is detected during Commercial Advance's forward fast-motion playback, normal playback resumes automatically.

●Commercial Advance disables commercial marking when the recording is less than 15 minutes.

●Commercial Advance does not mark the start of a commercial group when it is in the first or last two minutes of a recording.

●Commercial Advance does not mark commercial groups which are less than 59 seconds or groups which contain only one commercial.

●Some portions of programs may be detected as commercials.

●Some commercials may not be detected properly.

Page 31 Page 33
Image 32
Page 31 Page 33
Contents HR-S7500U Dear Customer Do not place the VCRInstallation Antenna Installation InstructionsServicing Before YOU Install Your NEW VCRUSE Contents Connections Matching Transformer not supplied Connect VCR to TVPlug & Play Setup Plug & PlayEN I Nitial Sett Ings Auto Clock Set/Auto Tuner SetInformation EN Initial Settings LanguageScreen Select LanguageAccess Main Menu Access Initial SETAccess Clock SET ClockSelect D.S.T. Mode SET Auto Clock to onSelect Host Channel Semi-AutoSelect Time Zone SET TimeSET Date SET YearAccess Tuner SET Screen TunerSET Set Receivable ChannelsAccess Main Menu Screen Access ManualChannel Add Or Delete a ChannelCable Box Control Situate ControllerAttach Controller Connect Cable BOX to VCRAccess Cable BOX SET Turn on Cable BOXSelect Cable BOX Output ChannelAccess Cable BOX Brand SET Screen Initial SettingsEnter Cable BOX Brand Brand CodeFasten securely using the supplied adhesive strips DBS Receiver ControlConnect DBS Receiver To VCR DBS receiverSet DBS Receiver Output Channel & DBS Receiver Brand Turn on DBS ReceiverSelect DBS Receiver Access DBS Receiver DBS Receiver Code from Following list, then Press OKJVC Dish Network Echostar Dish Network JVCSimple Playback Load a CassetteFind Program Start Point Start PlaybackSimple Recording Playback Features Activate FRAME-BY Frame PlaybackStill Picture/Frame-By- Frame Playback Slow Motion/Reverse Slow MotionAccess Distant Code Engage Manual Tracking ModeAdjust Manual Tracking Start SearchLayback and Recording Features Video StabilizerPress OK or Time Scan CH 5 or Time ScanActivate Instant Review Reset Counter to ZeroStop Repeat Mode SuperimposeAccess Function SET SET ModeSelect Audio Monitor Select The SoundtrackAV Compu Link Playback Access Skip Menu Perform MovieAdvance Movie AdvanceCommercial Advance Commercial Advance works as followsSelect CA Playback SET Mode Audio signal during TimeScan Time ScanVariable-Speed Search/ Reverse Motion Playback Playback tape 1 2 3 4Skip Over Unwanted Sections Skip SearchSpeed Audio output Audio isAccess Function SET Screen Select Timescan Audio ModeTimeScan Audio Place MenuDigital TBC/NR Select Digital TBC/NRDigital R3 Active Video Calibration Video CalibrationThen press OK or Time Scan #to set to on or OFFPlayback RecordingRecording Features VHS Super VHS, S-VHS ET and VHS Super VHS ET Select S-VHS ET SET ModeEngage S-VHS ET Mode To Record SAP Programs Select 2ND Audio Record SET ModeStereo And SAP Second Audio Program Adjust Audio Control ScreenRecording Level Return to NormalVCR Plus+ Timer Programming Timer RecordingAccess VCR PLUS+ Screen NumberCheck Program Data Engage Timer ModeEN Timer Recording VCR Plus+ Setup VCR Plus+ Guide Channel MatchingInitial SET, then press OK or Time Scan #Access Guide Channel SET Screen Ex. When inputting the Guide Channel number 6 for WNJUIndInput Guide Channel Number Input Receiving Channel NumberSET Channel Number Express Timer ProgrammingSET Program Date Press SP/EP to set the tape speed Set to OFF pg ,Band indication TV or Catv Or DBS appears underCancel or Revise a RE-ENGAGE TimerCheck, Cancel And Revise Programs ProgramSelect Auto SP=EP Timer SET Mode Auto SP=EP TimerAuto Timer Or Time Scan %ÞInstant Timer Recording ITR Engage ITR ModeSET Recording Duration Press REC on the front panelBefore performing the following steps Prog REC ModeAutomatic Sat- ellite Program Recording Edit To Or From Another SET RECORDER’S Input Mode Edit From a CamcorderMake Connections Load a CassetteEnable Remote Pause Function Access Function SET ScreenStart Player Start RecorderReset the Counter Insert EditingLocate END Point Locate Start PointEND Insert Editing Engage Insert EditingStart Editing SET RECORDER’S Input Mode Audio DubbingEngage Audio Dubbing Start DubbingSpeci AL Features EN TV Multi-Brand Remote ControlTurn on the TV SET TV Brand CodeEN Special Features Cable Box Multi-Brand Remote ControlTurn on the Cable BOX Operate Cable BOXDBS Receiver Multi-Brand Remote Control Turn on the DBS ReceiverEnter DBS Receiver Brand Operate DBS ReceiverUnplug Vcrs Power SET Remote ControlPlug in Power Cord Turn VCR Power onTroubleshooting Cassette gets stuck partwayTimer again RoubleshootingOther Problems When scanning channels, someEN Question S and Answers Can the VCR indefinitely remain in the still mode?Can the VCR indefinitely remain in the Record-Pause mode? What happens if the tape runs out during recording?Express Timer Programming MBR Multi-Brand Remote Code SettingIndex List Of TermsFront View Rear View Remote Control 20C to 60C -4F to140F Video connectors in x 1, OUT xSpeci Fications HOW to Locate Your JVC Service Center Limited Warranty HR-S7500U
Top Page Image Contents