JVC HR-S7500U manual Plug & Play Setup, EN I Nitial Sett Ings, Auto Clock Set/Auto Tuner Set

Page 8

8ENINITIALSETTINGS

Plug & Play

Auto Clock Set/Auto Tuner Set

The Plug & Play function sets the clock and tuner channels automatically when power is first connected to the VCR. The antenna cable must be connected for the Plug & Play function.

The time and date can be set automatically from clock setting data that is transmitted by one of the regular TV broadcast channels. We call this TV channel the “Host Channel” and it is a PBS channel in your area.

ATTENTION

If you use a cable box, Plug & Play will not function; set the clock and tuner channels manually. (☞ pg.11 – 15)

	–	+
POWER	MENU
		JOG
		SHUTTLE

IMPORTANT

●Don’t press any buttons on the VCR or remote while Plug & Play is in progress.

●If you perform Plug & Play successfully, there’s no need to perform the Clock (☞ pg. 11) and Tuner (☞ pg. 14) procedures. If, however, you want to add or delete channels, refer to “Add Or Delete A Channel” on page 15.

1

PLUG & PLAY SETUP

Connect the antenna cable to the VCR (☞ pg. 6). Then connect the VCR’s power plug to an AC outlet. Do not power on the VCR. The clock and tuner channels will be set automatically.

NOTES:

●Auto clock set is performed first. The auto clock set function scans all the channels received by your VCR to find the Host Channel and then sets the clock. "Auto" blinks on the front display panel during Auto clock set.

●Auto channel set is performed next. The auto channel set function scans all the channels that are receivable by your VCR. It then automatically assigns each receivable channels to the CH5° (+/–) buttons. It skips non-receivable channels. During auto channel set the channel numbers are displayed as they are scanned and set.

●When Plug & Play has been completed successfully the correct time is displayed.

●If an incorrect time or "– –:– –" appears on the display panel, see "What To Do If Plug & Play Has Failed" on next page.



During Initial Auto Clock Set			During Auto Channel Set			Plug & Play Completed
"Auto" blinks.			The channel numbers are displayed			The current time (including
			as they are scanned and set.			AM/PM) is displayed.

* If an incorrect time or "– –:– –" appears on the display panel, see "What To Do If Plug & Play Has Failed" on next page.

Image 8

Contents HR-S7500U Dear Customer Do not place the VCRInstallation Antenna Installation InstructionsServicing Before YOU Install Your NEW VCRUSE Contents Connections Matching Transformer not supplied Connect VCR to TVPlug & Play Setup Plug & PlayEN I Nitial Sett Ings Auto Clock Set/Auto Tuner SetInformation EN Initial Settings LanguageScreen Select LanguageAccess Main Menu Access Initial SETAccess Clock SET ClockSelect D.S.T. Mode SET Auto Clock to onSelect Host Channel Semi-AutoSelect Time Zone SET TimeSET Date SET YearAccess Tuner SET Screen TunerSET Set Receivable ChannelsAccess Main Menu Screen Access ManualChannel Add Or Delete a ChannelCable Box Control Situate ControllerAttach Controller Connect Cable BOX to VCRAccess Cable BOX SET Turn on Cable BOXSelect Cable BOX Output ChannelAccess Cable BOX Brand SET Screen Initial SettingsEnter Cable BOX Brand Brand CodeFasten securely using the supplied adhesive strips DBS Receiver ControlConnect DBS Receiver To VCR DBS receiverSet DBS Receiver Output Channel & DBS Receiver Brand Turn on DBS ReceiverSelect DBS Receiver Access DBS Receiver DBS Receiver Code from Following list, then Press OKJVC Dish Network Echostar Dish Network JVCSimple Playback Load a CassetteFind Program Start Point Start PlaybackSimple Recording Playback Features Activate FRAME-BY Frame PlaybackStill Picture/Frame-By- Frame Playback Slow Motion/Reverse Slow MotionAccess Distant Code Engage Manual Tracking ModeAdjust Manual Tracking Start SearchLayback and Recording Features Video StabilizerPress OK or Time Scan CH 5 or Time ScanActivate Instant Review Reset Counter to ZeroStop Repeat Mode SuperimposeAccess Function SET SET ModeSelect Audio Monitor Select The SoundtrackAV Compu Link Playback Access Skip Menu Perform MovieAdvance Movie AdvanceCommercial Advance Commercial Advance works as followsSelect CA Playback SET Mode Audio signal during TimeScan Time ScanVariable-Speed Search/ Reverse Motion Playback Playback tape 1 2 3 4Skip Over Unwanted Sections Skip SearchSpeed Audio output Audio isAccess Function SET Screen Select Timescan Audio ModeTimeScan Audio Place MenuDigital TBC/NR Select Digital TBC/NRDigital R3 Active Video Calibration Video CalibrationThen press OK or Time Scan #to set to on or OFFPlayback RecordingRecording Features VHS Super VHS, S-VHS ET and VHS Super VHS ET Select S-VHS ET SET ModeEngage S-VHS ET Mode To Record SAP Programs Select 2ND Audio Record SET ModeStereo And SAP Second Audio Program Adjust Audio Control ScreenRecording Level Return to NormalVCR Plus+ Timer Programming Timer RecordingAccess VCR PLUS+ Screen NumberCheck Program Data Engage Timer ModeEN Timer Recording VCR Plus+ Setup VCR Plus+ Guide Channel MatchingInitial SET, then press OK or Time Scan #Access Guide Channel SET Screen Ex. When inputting the Guide Channel number 6 for WNJUIndInput Guide Channel Number Input Receiving Channel NumberSET Channel Number Express Timer ProgrammingSET Program Date Press SP/EP to set the tape speed Set to OFF pg ,Band indication TV or Catv Or DBS appears underCancel or Revise a RE-ENGAGE TimerCheck, Cancel And Revise Programs ProgramSelect Auto SP=EP Timer SET Mode Auto SP=EP TimerAuto Timer Or Time Scan %ÞInstant Timer Recording ITR Engage ITR ModeSET Recording Duration Press REC on the front panelBefore performing the following steps Prog REC ModeAutomatic Sat- ellite Program Recording Edit To Or From Another SET RECORDER’S Input Mode Edit From a CamcorderMake Connections Load a CassetteEnable Remote Pause Function Access Function SET ScreenStart Player Start RecorderReset the Counter Insert EditingLocate END Point Locate Start PointEND Insert Editing Engage Insert EditingStart Editing SET RECORDER’S Input Mode Audio DubbingEngage Audio Dubbing Start DubbingSpeci AL Features EN TV Multi-Brand Remote ControlTurn on the TV SET TV Brand CodeEN Special Features Cable Box Multi-Brand Remote ControlTurn on the Cable BOX Operate Cable BOXDBS Receiver Multi-Brand Remote Control Turn on the DBS ReceiverEnter DBS Receiver Brand Operate DBS ReceiverUnplug Vcrs Power SET Remote ControlPlug in Power Cord Turn VCR Power onTroubleshooting Cassette gets stuck partwayTimer again RoubleshootingOther Problems When scanning channels, someEN Question S and Answers Can the VCR indefinitely remain in the still mode?Can the VCR indefinitely remain in the Record-Pause mode? What happens if the tape runs out during recording?Express Timer Programming MBR Multi-Brand Remote Code SettingIndex List Of TermsFront View Rear View Remote Control 20C to 60C -4F to140F Video connectors in x 1, OUT xSpeci Fications HOW to Locate Your JVC Service Center Limited Warranty HR-S7500U