JVC HR-S7500EK setup guide Recording

12

BASICOPERATIONS (cont.)

Recording

Turn on the TV and select the VIDEO channel (or AV mode).

		5	PLAY	PROGTV	2
	1
PAUSE				STOP/EJECT
5	RECORD		SP/LP
					6

4 3

TV signals being received by the recorder’s built-in tuner can be recorded onto a video tape. You can “capture” a TV programme using your video recorder.

1	LOAD A CASSETTE
	Insert a cassette with the record safety tab intact (See
	below).
	● The counter is reset to 0:00:00 and the recorder
	power comes on automatically.

2		CHOOSE A PROGRAMME
		Press TV PROG +/– or the NUMBER keys to select the
	preset you wish to record.
		● The TV PROG dial can also be used to select a preset.

SET TAPE SPEED

Press SP/LP ( ). Check the SP/LP indicator on the

recorder display panel to confirm the selected tape

3 speed.

● Picture quality of LP recordings will not be as high as

on SP recordings.

START RECORDING

Press and hold RECORD and press PLAY on the remote

4 control, or press RECORD on the recorder.

– –:– –

2	1	2	3
	4	5	6
NUMBER
	7	8	9
		0

2

4

TV PROG 2

SP/LP 3

	B.E.S.T. takes place at the beginning of both the
	first SP and the first LP recording after inserting the
	cassette (☞ pg. 20).
	● You can not change the preset whilst recording is in
	progress. To change the preset, see step 5.
	PAUSE/RESUME
5	RECORDING
	Press PAUSE. Press PLAY to resume recording.
	● During the Record Pause mode, you can change the

		1
		PLAY 4,5
4 RECORD		PAUSE 5
		3
	6	STOP

preset by pressing the TV PROG +/– buttons or the

NUMBER keys or by turning the TV PROG dial.

STOP RECORDING

Press STOP on the remote control or STOP/EJECT on

the recorder. Then press STOP/EJECT to remove the

6 cassette.

Recording Resume Function

If there is a power outage during recording (or Instant Timer Recording or timer recording), the recording will resume automatically when power is restored to the recorder unless the recorder's memory backup has expired.

Accidental erasure prevention

●To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab