JVC HR-S7500EK AV2 Select Setting, TV Receiver, Your recorder, SAT. See page 26 as well

33

A

TV Receiver Player Your recorder

B

Recorder Your recorder TV Receiver

	21-pin SCART Cable
VIDEO	(not provided)
CHAN-
NEL or	RF Cable
AV mode
	(provided)

21-pin SCART Cable (not provided)

RF Cable (provided)

VIDEO CHAN- NEL or AV mode

Another recorder

Recorder

Another recorder

Player

AV2 SELECT Setting

Set "AV2 SELECT" to the appropriate mode depending on the type of unit connected to the rear panel AV2 IN connector of this recorder.

1Press MENU to access the Main Menu screen.

2 Press %Þto move the highlight bar (pointer) to "MODE SET", then press OK or Þ .

3Press %Þto move the highlight bar (pointer) to "AV2 SELECT".

4 Press OK or Þ to select one of the following:

a–VIDEO	: If a connected device's output is compatible only with regular video
	signals, set "AV2 SELECT" to "VIDEO".
b–S-VIDEO	: If a connected device's output is compatible with Y/C signals, set "AV2
	SELECT" to "S-VIDEO". This setting will let you take advantage of higher-
	quality S-VHS pictures.
c–SAT	: If a satellite receiver is connected to the AV2 IN connector, set "AV2 SELECT" to
	"SAT". (See page 26 as well.)

5 Press MENU to return to normal screen.

MODE SET
AUTO TIMER	OFF
O. S. D.	ON
B. E. S. T.	ON
AUTO SP=LP TIMER	OFF
S-VHS	AUTO
EDIT	ON
AV2 SELECT	VIDEO
[5°] =
[MENU] : EXIT

●If you are using a satellite receiver, be sure to set "AV2 SELECT" back to "SAT" after editing.

●If you're not using a satellite receiver, leave "AV2 SELECT" set to "VIDEO" or "S-VIDEO".

●The default setting is "VIDEO"; if the recorder's memory backup has expired due to a power cut or because the AC was removed from the recorder, "VIDEO" will be automatically selected when the power is restored to the recorder. If you are using a satellite receiver, be sure to set "AV2 SELECT" back to "SAT".