JVC HR-V617EK, HR-V616EK, HR-V615EK manual Moisture Condensation

Page 3

safety first

3

When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides

to allow for ventilation (10 cm or more on both sides, on top and at the rear.)

When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly.

Failure to heed the following precautions may result in damage to the recorder, remote control or video cassette.

1.DO NOT place the recorder…

in an environment prone to extreme temperatures or humidity.

in direct sunlight.

in a dusty environment.

in an environment where strong magnetic fields are generated.

on a surface that is unstable or subject to vibration.

2.DO NOT block the recorder’s ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

3.DO NOT place heavy objects on the recorder or remote control.

4.DO NOT place anything which might spill on top of the recorder or remote control.

(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

5.DO NOT expose the apparatus to dripping or splashing.

6.DO NOT use this equipment in a bathroom or places with water. Also DO NOT place any con- tainers filled with water or liquids (such as cosmetics or medicines, flower vases, potted plants, cups, etc.) on top of this unit.

7.DO NOT place any naked flame sources, such as lighted candles, on the apparatus.

8.AVOID violent shocks to the recorder during transport.

MOISTURE CONDENSATION

Moisture in the air will condense on the recorder when you move it from a cold place to a warm place, or under extremely humid conditions—just as water droplets form in the surface of a glass filled with cold liquid. Moisture condensation on the head drum will cause damage to the tape. In conditions where condensation may occur, keep the recorder turned on for a few hours to let the moisture dry.

ATTENTION

TO MOBILE PHONE USERS:

Using a mobile phone in the vicinity of the recorder may cause picture vibration on the TV screen or change the screen to a blue back display.

ON PLACING THE RECORDER:

Some TVs or other appliances generate strong magnetic fields. Do not place this appliance on top of the recorder as it may cause picture disturbance.

Cassettes marked “VHS” (or “S-VHS”) can be used with this video cassette recorder. However, S-VHS recording is not possible with this model.

This model is equipped with SQPB (S-VHS QUASI PLAYBACK) that makes it possible to play back S-VHS recordings in the SP mode with regular VHS resolution.

HQ VHS is compatible with existing VHS equipment.

VIDEO Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation. The VIDEO Plus+ system is manufactured under license from Gemstar Development Corporation.

HR-V615/616/617EK-EN/p02-07

3

3/8/04, 10:04 AM

Black

Image 3
Contents HR-V615EK HR-V616EK HR-V617EK If in doubt consult a competent electrician Safety PrecautionsMoisture Condensation On The Safe Use Of Equipment Some Do’s And Don’tsContents Rear panel Front Panel Diagram KeyGetting Everything Ready Welcome to JVCPerform Auto Setup pg Three-Step Quick Start Auto SetupThree step quick start Preset DownloadFinish Off Check the ResultsBasic Features Stop & Eject PlaybackLoad a Video Cassette PlayRewind and Fast Forward Video Heads CleaningPlayback Features Pause During PlaybackSingle Frame Movement Slow Motion Variable Speed SearchPicture Search Start Recording RecordingChoose a Programme Set the Tape SpeedRecord a Programme While Watching Another Resetting the CounterDisplay Tape Remaining Time Change Display InformationRecording Resume Function Instant Timer RecordingEnter the PlusCode Number Get to the Video Plus + ScreenScreen appears Return to Normal ScreenEngage Timer Mode Enter Programme Details Express Timer ProgrammingGet to the Timer Programming Set Screen Get to the Programme ScreenReturn to Normal Screen Press c, then press oto disengage the timer mode Check, Cancel & Change ProgrammesConfirm overlapping programmes When Programmes Overlap Each OtherBasic features Advanced Features Picture Quality Manual TrackingPicture Control Turning B.E.S.T. on or OFF Recording and Playback Using B.E.S.TAvoiding B.E.S.T. Time Delay B.E.S.T Picture SystemSound Modes Nicam Stereo and Bilingual BroadcastsSoundtrack Selection Instant Review Finding Specific ScenesSkip Search Index SearchVCR Auto Standby TV Auto Power OnLink Functions Next View LinkButton Direct RecInstalling Satellite Controller Satellite Receiver Control SettingsSET using the PR and PR buttons. Press OK button or Setting satellite receiver’s brandCheck Result of Test Auto Record from Satellite Receiver Auto SatelliteAdvanced features Editing Editing Using Another VCRStart recorder Press T Editing from a CamcorderOn-Screen Display O.S.D Other FunctionsAuto SP aLP Timer Power Save ModeNext Function Memory Auto TimerAuto Power Off/3H Repeat PlaybackAUX in or Tape Monitor Connection to a Stereo SystemSet Video Channel Access Video Channel ModeExit Video Channel Set Mode Video Channel SetTuner Set Auto Channel SetupPress Button and you Manual Channel SetupDelete a Channel Change Station NameChange Station Preset Position TV Station ID Guide Fine-Tuning Stored ChannelsBBC1 BBC2 ITV CH4 CH5 TV Station Channel Number GuideClock Set Setting the ClockPlayback Question and AnswersSymptom Possible Cause TroubleshootingRecording Other Problems List of Terms HR-V615/616/617EK