JVC HR-V617EK, HR-V616EK Satellite Receiver Control Settings, Installing Satellite Controller

36

advanced features

Satellite Receiver

Control Settings

The following procedure is required if you receive satellite channels through a satellite receiver. Around 20 seconds before the VIDEO Plus+ timer record- ing or Manual timer recording starts, the VCR sets its input mode to L-2 and automatically switches the satellite receiver’s channels using an optional Satellite Controller.

Installing Satellite Controller

situate satellite controller Place the Satellite Controller so that the path between its transmitter and the satellite receiver’s remote sensor is unobstructed.

attach satellite controller Fix securely using the adhesive strip at- tached on the back of the Satellite Controller.

connect up Be sure to connect the recorder’s L-2 IN/DECODER connector to the satellite receiver’s 21-pin SCART connector.

note When connecting your satellite receiver, refer to its instruction manual.

connect satellite controller to vcr Connect the Satellite Controller to the SAT CONTROL connector on the rear panel.

Satellite Receiver

Your VCR		Satellite Controller
		(not provided)
		(suggested locations)
Transmitter		Satellite Controller
		(not provided)
Satellite Receiver
DECODER	VCR	TV

			SAT		ENTREE
					ANT. IN
			SAT CONTROL	SORTIE
L-2	ENTREE/DECODEUR	ENTREE/SORTIE		OUT
		L-1IN/OUT	R		SORTIE
					ANTENNE
			AUDIO		RF OUT
				L
		010

Your VCR

*DECODER function is not available in the UK.

HR-V615/616/617EK-EN/p29-42 36 3/8/04, 10:18 AM

Black