54
advanced features
Clock Set
You should only need to perform this function if:
•Auto Clock Set was not performed correctly by Auto Setup, Preset Download or Auto Channel Set
•The VCR’s memory backup has expired
•You want to change the Just Clock setting
Setting the Clock
get to the initial set screen Press MENU button. Move the highlight bar to INITIAL SET
using the PR 
and PR 
buttons and press OK button (or 
).
get to the clock set screen Move the highlight bar to CLOCK SET using the PR 
and PR 
buttons and press OK button (or 
).
set time and date When the CLOCK SET screen appears, the time will be blinking. Use the
PR and PR | buttons to set the correct time (pressing and |
|
|
|
|
|
| |
holding will advance the time in 30 minute increments) and then |
|
|
|
|
|
| ||
press OK button (or | ). The date will blink. Use the PR |
|
| CLOCK SET |
|
| ||
|
|
|
|
|
| |||
and PR buttons to set the correct date (pressing and holding |
| TIME | DATE |
| YEAR | |||
will advance the date in 15 day increments) and then press OK |
| 0: 00 | 01 . 01 |
| 03 |
| ||
|
| JUST CLOCK : ON | ||||||
button (or | ). Set the correct year in the same way and press |
|
| |||||
|
| TV PR. | : | 1 |
| |||
OK button. |
|
|
|
|
|
|
| |
|
| [1] a k |
|
|
| |||
|
|
| [MENU]: EXIT |
|
|
| ||
|
|
|
|
|
|
|
|
|
set just clock Set as desired using the PR 
and PR 
buttons then press OK button (or 
).
set preset for clock data source If you have set JUST CLOCK to ON, you will need to specify a preset (station) for JUST CLOCK to take its source data from. Use the PR 
and PR 
buttons to select the preset and press OK button (or 
).
start clock operation Press MENU button.
NOTE:
If the recorder’s memory backup has expired or the AC was disconnected from the recorder, the recorder will automatically perform Auto Clock Set when the power is restored.
Notes on Just Clock
Some TV stations transmit a time signal with their broadcasts. This VCR has the ability to use this signal to update its internal clock (including the adjustment for British Summer Time). It will do this every hour except for 23:00, 00:00, 01:00 and 02:00. By setting Just Clock to ON, you are enabling the VCR to do this.
Just Clock is not effective in the following circumstances:
•when the VCR is powered on
•when the VCR is in Timer or Auto Satellite Programme Recording modes
•when a difference of more than 3 minutes between the internal clock and the time signal exists.
•when reception conditions are poor.
54 | 3/12/04, 10:58 AM |
Black