JVC HR-V617EK, HR-V616EK, HR-V615EK manual Perform Auto Setup pg

scart and rf

SCART is a recommended option because its use improves the quality of the picture.

If connecting to a stereo TV you will need a SCART cable.

There are several types of SCART cables, fully- wired and others.

welcome to jvc 9

GETTING EVERYTHING READY (continued)

connect cables Connect the cables as indicated in the diagram (below), using the TV Aerial Cable, the RF Cable and the 21-pin SCART Cable (not provided).

RF Cable (provided)

TV Aerial

Cable

(not

provided)

21-pin SCART Cable (not provided)

Mains Power

Cord

		CONTROLEUR SAT		ENTREE
				ANT. IN
		SORTIE
ENTREE/DECODEUR	ENTREE/SORTIE	SAT CONTROL	OUT	ANTENNE
L-2IN/DECODER	L-1IN/OUT	R		SORTIE
		AUDIO		RF OUT
		L
	010

Back of VCR

Mains Outlet *DECODER function is not available in the UK.

If you use a SCART cable, you must also connect the RF cable.

You are now ready to start the Three-Step Quick Start which begins on the next page.

You have two ways for initial setup of your new VCR depending upon the connection method and your TV.

If you have connected only the RF cable, perform Auto Setup (☞ pg. 10).

If you have connected both the RF cable and the fully- wired 21-pin SCART cable, and if your TV does not offer T-V Link, etc.*,

perform Auto Setup (☞ pg. 10).

If you have connected both the RF cable and the fully- wired 21-pin SCART cable, and if your TV offer T-V Link, etc.*,

perform Preset Download (☞ pg. 11).

*Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link, DATA LOGIC or NexTView Link via fully-wired 21-pin SCART cable. The degree of compatibility and available functions may differ by system.

HR-V615/616/617EK-EN/p08-12 9 3/8/04, 10:06 AM

Black