JVC HR-V616EK, HR-V617EK, HR-V615EK manual Manual Channel Setup, Press Button and you

advanced features

Manual Channel Setup

get to the confirmation screen Press MENU button. Move

the highlight bar to MANUAL CH SET using the PR	and PR	MAIN MENU
buttons and press OK button (or ).		MODE SET
		AUTO CH SET
		F MANUAL CH SET
		INITIAL SET
		[1] a k
		[MENU]: EXIT

49

select position Use the PR button on the Remote Control to move the highlight bar to a vacant position then press OK button.

In this example, we have chosen position 6.

	PR	CH	ID	PR	CH ID
01		26	BBC1	08	- - - -
02		33	BBC2	09	- - - -	select band When the
03		23	ITV	10	- - - -
04		30	CH4	11	- - - -	MANUAL CH SET screen appears,
06		37	- - - -	13	- - - -
05			CH5	12	- - - -
						press the PR	and PR	PR	CH	ID	FINE
07			- - - -	14	- - - -
								06	CH01	- - - -	+/–
[10]
	ak: EDIT					buttons to change the band
	a[x]: DELETE
	[MENU]: EXIT					between CH (regular) and CC		[1]: SELECT
								[0]: CURSOR g
						(cable).		k: OK
								[MENU]: EXIT
						input channel number
						Press the	button and you

will see the channel number space flashing. Use the number keys to enter the Channel Number that you want to store.

input channel id Press the button to move to the Channel ID space and use the PR and PR buttons to select the required ID from the stored list.

fine tuning Press the button repeatedly to move to the Fine Tuning ‘+/–’ and use the PR and PR buttons to fine-tune the channel. A ‘+’ or a ‘–’ symbol will appear during this process.

save new channel details Press OK button to save the details you have just entered. The Confirmation Screen will appear again. Repeat the above procedure from Select Position onwards as many times as required.

close confirmation screen Press MENU button.

HR-V615/616/617EK-EN/p48-53 49 3/8/04, 10:21 AM

Black