JVC HR-VP78U Adjusting tracking condition, Selecting monitor sound, Automatic operations after

Page 23

EN 23

D Adjusting tracking condition

—Tracking Adjustments

Automatic tracking adjustment

This VCR automatically adjusts the tracking condition. Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback.

Manual tracking adjustment

If automatic tracking cannot eliminate noises well during playback, use the manual tracking following the procedures below.

●You can also use the manual tracking during slow motion playback ( pg. 29).

1 Activate manual tracking

Press CH 5 and ∞ on the front panel at the same time during playback.

2 Eliminate the noises on the TV screen.

Press CH 5 and ∞ (or CH + and – on the Remote).

●Press it briefly for a fine adjustment, or press and hold for coarse adjustment. Watch the screen and continue adjustment until optimum picture and sound quality are achieved.

3 Reactivate automatic tracking

Press CH 5 and ∞ on the front panel at the same time. The automatic tracking becomes active again.

E Selecting monitor sound

— Audio Monitor

You can select the desired monitor sound.

While playing back a tape on which stereo sound or SAP sound is recorded, press A. MONITOR on the Remote. Each time you press the button, sound changes as follows:

 

 

HI-FI

 

 

 

HI-FI L

 

 

HI-FI R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NORM

 

 

 

 

NORM

 

 

 

HI-FI

 

 

 

 

 

 

 

 

 

HI-FI: Normally select this.

Hi-Fi sound is played back.

HI-FI L: Sound on the left Hi-Fi channel is played back.

HI-FI R: Sound on the right Hi-Fi channel is played back. NORM:Sound on the normal track is played back. NORM HI-FI:

Both sounds on the Hi-Fi track and normal track are mixed and played back.

NOTES:

●The above indication appears when “SUPERIMPOSE” is set to “ON” ( pg. 38, 39), though the monitor sound changes in sequence.

●If the tape being played back has no Hi-Fi sound track, the normal sound track will be heard regardless of this setting.

●If RF connection ( pg. 7) is used for viewing pictures on the TV, sound will be monaural even though you select “HI-FI”.

●You can also use the menu to select your desired monitor sound. ( pg. 38, 41)

F Automatic operations after

rewinding — Next Function Memory

The Next Function Memory “tells” the VCR what to do after rewinding is complete.

●Ensure that the VCR is in stop mode.

a– For Automatic Playback Start

Press REW ( 1 ), then press PLAY ( 3 ) within 2 seconds.

b– For Automatic Power Off

Press REW ( 1 ), then press POWER within 2 seconds.

c– For Automatic Timer Standby

Press REW ( 1 ), then press TIMER within 2 seconds.

NOTE:

It is not possible to select the Automatic Timer Standby function if the cassette’s record safety tab is removed.

Page 22 Page 24
Image 23
Page 22 Page 24
Contents HR-VP78U Telephone Number Dear CustomerGrounding or Polarization Power SourcesPower Lines Power Cord ProtectionReplacement Parts AccessoriesDamage Requiring Service CleaningContents Back of VCR Basic ConnectionsANT. Video OUTConnect VCR to TV Check contentsConnect VCR to power source Situate VCRDuring Initial Auto Clock Set During Auto Channel Set Plug & Play SettingPerform Plug & Play setup What to do if Plug & Play setting failedLanguage SettingSelect clock set Clock SettingPressAccessMENUMain Menu screen Access Initial Set screen Preparations1Select host channel Setting clock semiautomaticallySelect D.S.T. mode Set Auto Clock to on12 EN Setting clock manuallyPerform Auto Channel Set Tuner SettingAutomatically Auto Channel Set Setting channels Access Tuner Set screenManual Channel Set Setting channels manually14 EN Connect cable box to VCR Cable Box Control SettingSituate Controller Attach ControllerTurn on cable box Access Cable Box Set screenSelect cable box output channel Enter cable box brand Access Cable Box Brand Set screenController How to control the DBS receiver18 EN Connect DBS receiver to VCRSelect DBS receiver output channel Setting DBS receiver output channel & brandChannel 3 or 4 or AV mode on the TV 3Press Menu Turn on DBS receiverEnter DBS Receiver’s brand Access DBS Receiver Brand Set screen20 EN Start playback BasicPlayback Load a cassetteChecking tape position Basic Playback Features22 EN Changing display informationAutomatic operations after Adjusting tracking conditionSelecting monitor sound Locating beginning Locating beginning of timerAccess distant code 24 ENStart recording Basic RecordingSelect recording channel Set tape speedWatching one program while recording another Basic Recording Features26 EN Specifying recording lengthAccidental erasure prevention Showing on-screen displayDisplay VCR status on TV screen Erase on-screen displayRapidly Picture Search High-Speed Picture Search Special Effect Playback28 EN Locating particular scenePause during playback Viewing still pictureSkipping unwanted portions Viewing slow motion pictureEnter PlusCode number VCR Plus+ Timer ProgramingAccess VCR Plus+ screen 30 ENCheck program date Engage timer recording standby modeTo use the VCR while it is in timer recording standby mode Input receiving channel numberVCR Plus+ guide channel matching SetupVCR Plus+ 32 ENTo Initial SET, then Press OK Access Guide Channel Set screenInput guide channel number 34 EN Express Timer ProgramingDBS To timer-record daily Monday-Friday or weekly serialsCatv 36 EN Checking program settingsOverlapping programs blink on the screen Confirm overlapping programsSelect program to modify 38 EN SettingsUseful Function When this function is set to OFF When this function is set to onFor Example 40 ENVCR only Video OUT Pause This VCRTelevision Link Video42 EN PreventingConnection Edit To Or From AnotherCamcorder for playback Edit From Camcorder44 EN This VCR for recordingSelect Edit for Picture Control Select input mode on this VCRAccess Main Menu screen on this VCR Enable remote pause functionSet TV brand code TV Brand Setting46 EN Turn on the TVOperate cable box Cable Box Brand SettingTurn on the cable box Enter cable box brand codeEnter DBS receiver brand code DBS Receiver Brand Setting48 EN Turn on the DBS receiverTurn on VCR Remote Control CodeUnplug VCR Plug in VCR50 EN TroubleshootingTimer Recording 52 EN Other ProblemsWhat happens if the tape reaches its end during recording? Can the VCR indefinitely remain in still mode?VCR PLUS+ 54 ENList of terms Record Pause Front panel1Still Play Slow Record78Tape speed indication 56 ENRear panel1 5496783 How to use the RemoteCompact VHS* TC-20 ST-C20 TC-30 ST-C30 TC-40 ST-C40 58 ENUsable cassettes Full-Size VHS 30 ST-30HOW to Locate Your JVC Service Center 60 EN Limited WarrantyMemo 62 EN Page HR-VP78U
Top Page Image Contents