JVC HR-VP78U manual To timer-record daily Monday-Friday or weekly serials, Catv, Dbs

Page 35
Set tape speed

8

9Press SP/EP to set the tape speed.

Return to normal screen

Press PROG. or OK.

“PROGRAM COMPLETED” appears on the screen for about 5 seconds, then normal screen appears.

•If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made.

The Program Check screen appears and conflicting programs will start blinking.

You can now correct the conflicting programs. See “When programs overlap each other” on

0page 37.

Engage timer recording standby mode

Press TIMER.

The VCR turns off automatically and “‰” is displayed on the front panel display.

EN 35

NOTES:

●Even if a power failure occurs, the VCR keeps your timer programs. However, the clock time, channel settings, and other menu settings are lost if it lasts for more than 3 minutes. As a result, when the power is supplied again to this VCR after the power failure, the following will take place.

1.This VCR starts the Plug & Play setting automatically to restore the clock time and channel setting.

2.If the clock time and channel setting are restored correctly, each timer program you have made will start unless its end time already passes.

●Programs that start after midnight must have the next day’s date.

●After timer recording is completed, the VCR turns off automatically.

●You can program the timer recording while a regular recording is in progress; the menu screens will not be recorded.

●If the tape reaches its end during timer recording, the cassette is automatically ejected.

●To timer-record cable or satellite channels, be sure to keep the cable box or DBS receiver turned on.

To timer-record daily (Monday–Friday) or weekly serials

Press DAILY (M-F)(number “8”) or WEEKLY (number “9”) anytime during steps 3through 9.

“DAILY” or “WEEKLY” appears on the Program screen.

●Pressing the button again makes the corresponding indication disappear.

To use the VCR while it is in timer recording standby mode

Press TIMER to cancel the timer recording standby mode, then press POWER to turn on the VCR.

DO NOT forget to put the VCR into timer recording standby mode again by pressing TIMER after you use the VCR; otherwise, you cannot record the broadcast you want.

●When “AUTO TIMER” ( pg. 38, 39) is set to “ON”, the timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. You do not have to press TIMER to engage or disengage the timer recording standby mode.

ATTENTION FOR DBS RECEIVER USERS

If you are using a DBS

 

PROGRAM 1

receiver (unless “DBS

 

START

STOP

RECEIVER SET” is set to

 

 

8:00AM

 

=

 

9:00PM

 

 

“OFF”  pg. 19), the band

 

DATE

 

 

CH

 

12/24/00

 

 

 

110

 

SP

 

 

 

indication (TV, CATV or

 

 

 

 

 

 

 

SUN

 

 

 

DBS

 

 

 

 

PRESS (+/–, SP/EP, 8=DAILY,

DBS) appears under the

 

 

9=WEEKLY, 7=DBS), THEN (0K)

 

channel number

PRESS (PROG.) TO END

 

 

 

 

 

 

 

 

 

 

 

 

indication.

 

 

 

 

 

 

 

 

 

 

 

TV

:To timer-record a regular TV broadcast

 

received on the VCR.

 

 

 

 

 

 

 

 

 

 

 

CATV

:To timer-record a cable TV broadcast

 

received on the VCR, or through a cable box

 

(unless “CABLE BOX SET” is set to “OFF” 

 

pg. 16).

 

 

 

 

 

 

 

 

 

 

 

DBS

:To timer-record a satellite broadcast

 

received through a DBS receiver.

 

 

 

 

 

 

NOTE:

If “BAND” is set to “TV” on the Tuner Set screen ( pg.

13)and “CABLE BOX SET” is set to “OFF” on the Cable Box Set screen ( pg. 16), “CATV” will not be displayed on the Program screen; If “BAND” is set to “CATV” or “CABLE BOX SET” is set to “ON”, “TV” will not be displayed.

If the channel number entered requires that the band be set, “7=DBS” is displayed on the screen.

If this happens, press the Number key “7 (DBS)” to select “DBS”.

Page 34 Page 36
Image 35
Page 34 Page 36
Contents HR-VP78U Telephone Number Dear CustomerGrounding or Polarization Power SourcesPower Lines Power Cord ProtectionReplacement Parts AccessoriesDamage Requiring Service CleaningContents Back of VCR Basic ConnectionsANT. Video OUTConnect VCR to TV Check contentsConnect VCR to power source Situate VCRDuring Initial Auto Clock Set During Auto Channel Set Plug & Play SettingPerform Plug & Play setup What to do if Plug & Play setting failedLanguage SettingSelect clock set Clock SettingPressAccessMENUMain Menu screen Access Initial Set screen Preparations1Select host channel Setting clock semiautomaticallySelect D.S.T. mode Set Auto Clock to on12 EN Setting clock manuallyPerform Auto Channel Set Tuner SettingAutomatically Auto Channel Set Setting channels Access Tuner Set screenManual Channel Set Setting channels manually14 EN Connect cable box to VCR Cable Box Control SettingSituate Controller Attach ControllerTurn on cable box Access Cable Box Set screenSelect cable box output channel Enter cable box brand Access Cable Box Brand Set screenController How to control the DBS receiver18 EN Connect DBS receiver to VCRSelect DBS receiver output channel Setting DBS receiver output channel & brandChannel 3 or 4 or AV mode on the TV 3Press Menu Turn on DBS receiverEnter DBS Receiver’s brand Access DBS Receiver Brand Set screen20 EN Start playback BasicPlayback Load a cassetteChecking tape position Basic Playback Features22 EN Changing display informationAutomatic operations after Adjusting tracking conditionSelecting monitor sound Locating beginning Locating beginning of timerAccess distant code 24 ENStart recording Basic RecordingSelect recording channel Set tape speedWatching one program while recording another Basic Recording Features26 EN Specifying recording lengthAccidental erasure prevention Showing on-screen displayDisplay VCR status on TV screen Erase on-screen displayRapidly Picture Search High-Speed Picture Search Special Effect Playback28 EN Locating particular scenePause during playback Viewing still pictureSkipping unwanted portions Viewing slow motion pictureEnter PlusCode number VCR Plus+ Timer ProgramingAccess VCR Plus+ screen 30 ENCheck program date Engage timer recording standby modeTo use the VCR while it is in timer recording standby mode Input receiving channel numberVCR Plus+ guide channel matching SetupVCR Plus+ 32 ENTo Initial SET, then Press OK Access Guide Channel Set screenInput guide channel number 34 EN Express Timer ProgramingDBS To timer-record daily Monday-Friday or weekly serialsCatv 36 EN Checking program settingsOverlapping programs blink on the screen Confirm overlapping programsSelect program to modify 38 EN SettingsUseful Function When this function is set to OFF When this function is set to onFor Example 40 ENVCR only Video OUT Pause This VCRTelevision Link Video42 EN PreventingConnection Edit To Or From AnotherCamcorder for playback Edit From Camcorder44 EN This VCR for recordingSelect Edit for Picture Control Select input mode on this VCRAccess Main Menu screen on this VCR Enable remote pause functionSet TV brand code TV Brand Setting46 EN Turn on the TVOperate cable box Cable Box Brand SettingTurn on the cable box Enter cable box brand codeEnter DBS receiver brand code DBS Receiver Brand Setting48 EN Turn on the DBS receiverTurn on VCR Remote Control CodeUnplug VCR Plug in VCR50 EN TroubleshootingTimer Recording 52 EN Other ProblemsWhat happens if the tape reaches its end during recording? Can the VCR indefinitely remain in still mode?VCR PLUS+ 54 ENList of terms Record Pause Front panel1Still Play Slow Record78Tape speed indication 56 ENRear panel1 5496783 How to use the RemoteCompact VHS* TC-20 ST-C20 TC-30 ST-C30 TC-40 ST-C40 58 ENUsable cassettes Full-Size VHS 30 ST-30HOW to Locate Your JVC Service Center 60 EN Limited WarrantyMemo 62 EN Page HR-VP78U
Top Page Image Contents