JVC HR-VP78U manual Select input mode on this VCR, Access Main Menu screen on this VCR

Page 45
FUNCTION
= VIDEO CALIBRATION ON
PICTURE CONTROL AUTO
AUTO TIMEROFF
SUPERIMPOSE ON AUTO SP=EP TIMER OFF
VIDEO STABILIZER OFF NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
PREVIOUS PAGE
BLUE BACKON 2ND AUDIO RECORD OFF
AUDIO MONITOR HI-FI
= AV COMPU-LINK OFF
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END

7

EN 45

You can use a camcorder as the playback VCR and your VCR1as the recording VCR

Make connections

Connect an audio/video cable between the camcorder’s audio/video output connectors and your VCR’s video audio/video input connectors.

●When the JVC camcorder is equipped with the Master Edit Control, you can control the VCR from the camcorder. Connect the mini-plug cable (not supplied with this VCR) as illustrated to the left.

●When using a camcorder with a monaural output, connect the audio output connector on the camcorder to the left audio input connector

2on this VCR.

Load a cassette

Insert the cassette to be recorded on into this

3VCR (for recording).

Select input mode on this VCR

Select “L-1” — when connecting the camcorder to the audio/video input connectors on the rear panel.

Select “F-1” — when connecting the camcorder to the audio/video input connectors on the front panel.

On the front panel:

Press CH 5∞.

On the Remote:

4Press the Number key "0 (AUX)" or CH +/–.

Access Main Menu screen on this VCR

5Press MENU.

Access Function Set screen

On the front panel:

Press CH 5∞ to move the highlight bar (arrow) to “FUNCTION SET”, then press OK.

On the Remote:

Press SHUTTLE PLUS %fi to move the highlight bar (arrow) to “FUNCTION SET”, then press OK

6or SHUTTLE PLUS #.

Enable remote pause function

On the front panel: Press CH 5∞ to move the highlight bar (arrow) to “AV COMPU-LINK”, then press OK to set it to “OFF”.

On the Remote: Press SHUTTLE PLUS %fi to move the highlight bar (arrow) to “AV COMPU-LINK”, then press OK or SHUTTLE PLUS # to set it to “OFF”.

● The REMOTE PAUSE/

AV COMPU-LINK

connector works as the AV Compulink connector when “AV COMPU-LINK” is set to “ON” (  pg. 38 and 41), and works as the Remote Pause connector when “AV COMPU-

8LINK” is set to “OFF”.

Return to normal screen

9Press MENU.

Start playback

Press PLAY ( 3 ) on the camcorder.

NOTE:

If the camcorder is equipped with a superimpose/OSD disable feature then set it to “OFF” before starting

0playback.

Start recording

On the front panel:

Press REC ( ).

On the Remote:

Press REC ( ) and PLAY ( 3 ) at the same time.

●If you are using a Master Edit Control-equipped JVC camcorder, recording starts automatically on this VCR. (Refer to camcorder’s instruction manual.)

Select “EDIT” for Picture Control

Follow the procedure described on pages 38 and 39.

If your camcorder is a JVC Master Edit Control- equipped type — go to step 7.

If your camcorder is NOT a JVC Master Edit Control-equipped type — go to step 8.

NOTE:

Be sure to select “AUTO” for “PICTURE CONTROL” (or

“NORM” when “VIDEO CALIBRATION” is set to “OFF”) after you finish dubbing the tapes ( pg. 38 and 39).

Page 44 Page 46
Image 45
Page 44 Page 46
Contents HR-VP78U Telephone Number Dear CustomerPower Lines Power SourcesPower Cord Protection Grounding or PolarizationDamage Requiring Service AccessoriesCleaning Replacement PartsContents ANT. Basic ConnectionsVideo OUT Back of VCRConnect VCR to power source Check contentsSituate VCR Connect VCR to TVPerform Plug & Play setup Plug & Play SettingWhat to do if Plug & Play setting failed During Initial Auto Clock Set During Auto Channel SetLanguage SettingPressAccessMENUMain Menu screen Access Initial Set screen Clock SettingPreparations1 Select clock setSelect D.S.T. mode Setting clock semiautomaticallySet Auto Clock to on Select host channel12 EN Setting clock manuallyAutomatically Auto Channel Set Setting channels Tuner SettingAccess Tuner Set screen Perform Auto Channel SetSetting channels manually 14 ENManual Channel Set Situate Controller Cable Box Control SettingAttach Controller Connect cable box to VCRAccess Cable Box Set screen Select cable box output channelTurn on cable box Enter cable box brand Access Cable Box Brand Set screen18 EN How to control the DBS receiverConnect DBS receiver to VCR ControllerChannel 3 or 4 or AV mode on the TV 3Press Menu Setting DBS receiver output channel & brandTurn on DBS receiver Select DBS receiver output channelAccess DBS Receiver Brand Set screen 20 ENEnter DBS Receiver’s brand Playback BasicLoad a cassette Start playback22 EN Basic Playback FeaturesChanging display information Checking tape positionAdjusting tracking condition Selecting monitor soundAutomatic operations after Access distant code Locating beginning of timer24 EN Locating beginningSelect recording channel Basic RecordingSet tape speed Start recording26 EN Basic Recording FeaturesSpecifying recording length Watching one program while recording anotherDisplay VCR status on TV screen Showing on-screen displayErase on-screen display Accidental erasure prevention28 EN Special Effect PlaybackLocating particular scene Rapidly Picture Search High-Speed Picture SearchSkipping unwanted portions Viewing still pictureViewing slow motion picture Pause during playbackAccess VCR Plus+ screen VCR Plus+ Timer Programing30 EN Enter PlusCode numberTo use the VCR while it is in timer recording standby mode Engage timer recording standby modeInput receiving channel number Check program dateVCR Plus+ Setup32 EN VCR Plus+ guide channel matchingAccess Guide Channel Set screen Input guide channel numberTo Initial SET, then Press OK 34 EN Express Timer ProgramingTo timer-record daily Monday-Friday or weekly serials CatvDBS 36 EN Checking program settingsConfirm overlapping programs Select program to modifyOverlapping programs blink on the screen Settings Useful Function38 EN When this function is set to OFF When this function is set to onFor Example 40 ENTelevision This VCRLink Video VCR only Video OUT Pause42 EN PreventingConnection Edit To Or From Another44 EN Edit From CamcorderThis VCR for recording Camcorder for playbackAccess Main Menu screen on this VCR Select input mode on this VCREnable remote pause function Select Edit for Picture Control46 EN TV Brand SettingTurn on the TV Set TV brand codeTurn on the cable box Cable Box Brand SettingEnter cable box brand code Operate cable box48 EN DBS Receiver Brand SettingTurn on the DBS receiver Enter DBS receiver brand codeUnplug VCR Remote Control CodePlug in VCR Turn on VCR50 EN TroubleshootingTimer Recording 52 EN Other ProblemsWhat happens if the tape reaches its end during recording? Can the VCR indefinitely remain in still mode?54 EN List of termsVCR PLUS+ Still Play Slow Front panel1Record Record Pause56 EN Rear panel178Tape speed indication 5496783 How to use the RemoteUsable cassettes 58 ENFull-Size VHS 30 ST-30 Compact VHS* TC-20 ST-C20 TC-30 ST-C30 TC-40 ST-C40HOW to Locate Your JVC Service Center 60 EN Limited WarrantyMemo 62 EN Page HR-VP78U
Top Page Image Contents