JVC HR-E939EG Information On ShowView, Make List of Stored Station Names Channel Positions

22ENTIMERRECORDING

Information On ShowView

Turn on the TV and select the VIDEO channel (or AV mode).

			8
•• • • • ••		•• • • • ••
• •	• •	• •	• •

CH SET

		2
	1	2	3
NUMBER	4	5	6
	7	8	9
CANCEL		0

3 OK

1

PUSH JOG

With ShowView, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognise.

NOTE:

“Guide Prog. Number” (GUIDE PROG) refers to the assigned TV station numbers, according to broadcast area, for ShowView timer recording.

IMPORTANT

Perform the following procedure after the channel setting steps on pages 5 and 38 – 39, and after the Clock Set procedure on page 7.

After setting the Guide Prog. Numbers, the station names and channel positions may be incorrect if you stored or skipped channels. In this case, re-perform Guide Prog. Number setting.

Guide Prog. Number Set

MAKE LIST OF STORED

STATION NAMES AND

CHANNEL POSITIONS

1
	(Ex.)	Channel position	Station name
		1	ARD
		2	ZDF
		3	WDR

ACCESS CH. SET MODE MENU SCREEN

2	Press and hold CH SET for over 2 seconds. The
	Language screen appears. Press OK to access the Ch.
	Set Mode Menu screen.
3	SELECT MODE
	Press PUSH JOG%Þ to
	place the pointer next to	AUTO CH SET
	“GUIDE PROG SET”, then	MANUAL CH SET
	press OK. The Guide Prog.
	Set screen appears.	GUIDE PROG SET
		[5°] =
		[CANCEL] : EXIT