JVC HR-E939EG SET Clock, Return to Normal, Screen, SET Date and Time, SET Just Clock

8EN

INITIALSETTINGS(cont.)

Auto Clock Set

			8
•• • • • ••		•• • • • ••
• •	• •	• •	• •

	2
1	2	3

CLOCK	5	6
4
7	8	9
	0

3 OK

1

PUSH JOG

NOTES:

●Auto Clock and Just Clock require a PDC signal, and will not operate with a VPS signal.

●Just Clock (when set to "ON") enables adjustment of the recorder's built-in clock every hour on the hour, except for 11 o'clock in the evening and midnight.

●Just Clock is not effective when . . .

–the recorder’s power is on (unless the recorder is tuned to the same channel position selected in the Clock Set screen).

–the recorder is in the Timer mode.

–a difference of more than 3 minutes exists between the built-in clock’s time and the actual time.

●If Just Clock is set to "ON", the recorder’s clock is automati- cally adjusted at the start/end of Summer Time.

●Auto clock setting and Just Clock may not function properly depending on the reception condition.

●During Manual clock setting, if the day and month data are invalid (such as 31st April), the month digits are cleared automatically and the day digits begin blinking. Input the correct data.

●If, in step 3 of the Manual clock setting procedure, the year digits are automatically cleared and the day digits begin blinking, it is possible that you have input 29th February for a non-leap year. Input the correct data.

	SET CLOCK
3	AUTOMATICALLY
	At the Clock Set screen,
	press PUSH JOG%. The	AUTO CLOCK
	Auto Clock screen appears
	and clock setting begins.	PLEASE WAIT
	● If "TV PR." isn't set to the	JUST	CLOCK: ON
	channel position on	TV PR.	1
	which Auto Clock data
	is received, "ERROR"
	appears, and then the screen from step 2 reappears.
	To set "TV PR.", press OK to place the pointer next to
	it, then cycle through the numbers by pressing PUSH
	JOG%Þ until the number representing the channel
	position in which the station transmitting clock
	setting data is stored appears.
	RETURN TO NORMAL
4	SCREEN
	Once clock setting is completed, press CLOCK to return
	to the normal screen.

Manual Clock Set

3	SET DATE AND TIME
	Press PUSH JOG%Þ to set the hour, then press OK. The
	“minutes” display begins blinking. Repeat the proce-
	dure to set the minutes, day, month and year.
4	SET JUST CLOCK
	The default setting is “ON”. Set as desired by pressing
	PUSH JOG%Þ, then press OK.
	● If you set to “OFF”, you can disregard the next step as
	you won’t be able to receive regular clock adjust-
	ments.
	SET CLOCK DATA SOURCE
5	CHANNEL POSITION
	The recorder is preset to receive clock setting and
	adjustment data from channel position 1. Press PUSH
	JOG%Þ to set the channel position to the number
	representing the station transmitting clock setting data,
	then press OK.
6	START CLOCK OPERATION
	Press CLOCK.