JVC HR-E939EG specifications Connecting Using a Decoder

Page 4

4EN

INSTALLINGYOURNEWRECORDER (cont.)

3

4

SET TV CHANNEL

Set your TV to the video channel (UHF channel 36). Two white bars appear on screen vertically.

●Tune the TV until the bars are as clear as they can be.

●Your TV should be set to the channel designated for use with a video recorder, or to a spare channel if there is not a specified video channel on your TV.

RESET OUTPUT MODE

Return the RF TEST switch to OFF.

NOTES:

●If CH36 is occupied by a local station, adjust the RF output channel adjustment screw to use another channel between CH32 and CH40 instead.

●If some interference noise is continually seen on the screen, consult your JVC dealer.

Connecting/

Using A

Decoder

TV Receiver

The AV2 IN/DECODER connector can be used as an input terminal for an external decoder (descrambler). Simply connect a decoder and you can enjoy the variety of programming that is available through scrambled channels.

SELECT INPUT MODE

1 Set the AV2 SELECT switch to "DECODER".

CONNECT DECODER

Connect your recorder's AV2 IN/DECODER connector

to the decoder's Euroconnector using a 21-pin SCART

2 cable.

SET TUNER

Follow the procedure starting on page 5.

RF Cable (provided)

TV Aerial Cable

3

AV2 IN/DECODER

NOTE:

When Connecting A Satellite Tuner . . .

. . . if you don't have a decoder connect the satellite tuner directly to the video recorder's AV2 IN/DECODER connector.

AV2 SELECT switch

Satellite antenna

Rear View

AV1 IN/OUT

. . . if you have a decoder, first connect the decoder to the decoder input of the satellite tuner, then connect the satellite tuner's output to the recorder's AV2 IN/DECODER connector. Refer to the instruction book for the satellite tuner and decoder.

. . . set the AV2 SELECT switch to "AV2".

. . . to view a programme via the satellite tuner, select AU 2 mode by pressing TV PROG. until "AU 2" appears on the display panel.

Satellite tuner

Decoder

Image 4

Contents HR-E939EG/EH For Italy Safety PrecautionsDo not place the recorder Connections BasicTune The TV To Your Video Recorder Connecting Using a Decoder Access Language Screen Tuner SetSelect Language Select CountryEN Initial Settings Fine tuning is performed automatically when you selectView Confirmation Screen Return to Normal ScreenTurn the Recorder on Clock SetPreparation SET Clock Return to NormalScreen SET Date and TimePlayback Load a CassettePoint Start PlaybackPause During Playback Playback FeaturesActivate HIGH-SPEED Search Adjust Tracking Override Automatic TrackingManually Activate Instant ReviewActivate Scene Finder Stop Scene FinderActivate Index Search EN PlaybackSET A/B Code Switch RE-SUPPLY PowerActivate Counter MemoryAudio signal during TimeScan Time Scan Shuttle Indicator Time Scan IndicatorTimeScan Variable-Speed Search/ Reverse PlaySpeed SP Speed LP TimeScanAudio output Recording Access Mode Select S.T. PictureSystem Confirm B.E.S.T. StatusPlayback ENABLE/DISABLE Close Mode SelectOn-Screen Displays ON-SCREEN DisplayRecording Features EN RecordingReceiving Stereo And Bilin- gual Programmes To Record Stereo And Bilin- gual Programmes A2Reset Counter Engage ITR ModeLevel Select Channel to WatchAccess CH. SET Mode Menu Screen EN Timer RecordingInformation On ShowView Make List of Stored Station Names Channel PositionsWhen Using a Satellite Tuner Enter Showview NumberClose Menu PreparationShowView Timer Recording EN Timer RECORDINGcontAccess Timer PROGRAM- Ming Screen When Using The Illumi-Guide FeatureAccess Showview Program Screen Timer ModeEngage RECORDER’S Access Programme Screen Regular Timer ProgrammingEnter Programme Start Time Engage RECORDER’S Timer Mode TimeEnter Channel Position ScreenAccess Programme Screen TimerRevise Programme IN- Formation Engage Auto SP/LPMulti-Brand Remote Control Remote Control ENSET TV Brand Code TRY Operating TVSET Recording DECK’S Input Mode Edit To Or From Another Video RecorderMake Connections Start Source PlayerSET RECORDER’S Input Mode Edit From a CamcorderStart Camcorder Start RecorderRandom As Semble EditingLocate EDIT-OUT Point Start R.A. EditEND R.A. Edit Prepare Recording DeckSET Input Mode Reset the CounterLocate Start Point Locate END PointStart Editing Engage Insert EditingEND Insert Editing Audio Dubbing Engage Audio DubbingStart Dubbing END Audio DubbingPause Access CH. SET Mode Select ModeMenu Select PositionSwitch Stations Access Manual CH. SETPerform Tuning Select NEW StationStation Name Troubleshooting E N ClearTimer again OubleshootingÄ remain lit on the display panel. Is there a problem? Questions and Answer SOpen the lid to access covered connectors and buttons 44 ENIndicator will blink during turbo search Rear ViewInstalling Batteries How To UseIndex E RSpeci Fications EN RCA connectors VideoMaximum recording time HR-E939EG/EH