Magnavox MVR630MG, MVR430MG owner manual Hookups with a Stereo TV

Page 10

mvr630mg.QX33 2/11/02 12:05 PM Page 10

10 Hookups with a Stereo TV

1 antenna or cable to ANT(enna) IN Jack

MVR630MG

VIDEO (yellow) and

2Video Cable

Audio and Video

AUDIO (red and white)

IN Jacks on TV

OUT Jacks

3Stereo Audio Cable

Audio and Video cables are not supplied.

 

1

antenna or cable to

 

 

MVR430MG

 

ANT(enna) IN Jack

 

 

VIDEO (yellow) and

2Video Cable

 

 

AUDIO (white) OUT Jacks

 

Audio and Video

3

 

 

IN Jacks on TV

“Y” splitter Audio Cable

1 Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR.

2 Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR, then con- nect the other end of the video cable to the VIDEO IN Jack on your TV.

3 MVR630MG

Connect a stereo audio cable to the red and white AUDIO OUT Jacks on the back of the VCR, matching cable colors to the jack colors.Then, connect the other end of the audio cable to the AUDIO IN Jacks on your TV, again matching cable colors to the jack colors.

If your TV’s AUDIO IN jacks or your stereo audio cable ends are not color coded, connect the red (right) AUDIO OUT jack of the VCR to the right AUDIO IN jack on the TV. Connect the white (left) AUDIO OUT jack of the VCR to the left AUDIO IN jack on the TV. The AUDIO IN jacks on your TV should be marked left and right. If they are not, consult your TV owner’s manual.

MVR430MG

Connect an audio cable to the white AUDIO OUT jack on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN jack on your TV.

If your TV has Right and Left AUDIO IN jacks, you must use a “Y” splitter audio cable as illustrated to deliver audio to the TV’s right and left channels.

4 Turn on your TV, making sure it is in Line Input mode. This might be referred to as the TV’s A/V IN or Audio/Video In channel, External or EXT channel, or AUX or Auxiliary In channel. Please refer to your TV owner’s manual for details.

Image 10
Contents MVR430MG/MVR630MG VCR Warranty Verification Dear Magnavox product ownerTable of Contents Introduction FeaturesSafety Precautions Declaration of ConformityBattery Safety Before Using Your VCRPutting Batteries in the Remote Control VCR maintenanceHookups Without a Cable Box/Direct Broadcast System Disconnect the antenna or cable from your TVCH3 CH4 Connections Hookups With a Cable Box/Direct Broadcast SystemRecording/Viewing Any Channel Connect a Cable signal to the VCR’s ANTenna in Jack Signal RF coaxial cable TV’s AntennaRecording One Channel/Watching Another Hookups with a Stereo TV MVR630MGCorrectly. Details are on pages Press the Menu button. The display shown below will appearPress the Menu button Automatic Channel SetupMVR630MG only Automatic Channel Setup cont’d Adding/Deleting ChannelsReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitButton Setting the ClockVCR may lose the clock setting if the power fails Enter a 0 before a single-digit numberDaylight-Savings Time Language Selection Press the STATUS/EXIT buttonRemote Control Buttons Remote Control Buttons cont’d CHannel o/p ButtonIf you select Status ON, then select Counter only OFF If you select Status ON, then select Counter only onIf you select Status OFF VCR Display Panel Front Panel Rear Panel Read and follow the steps below to play a tape Other playback options and features are on pagesPlaying 1Turn on the TV 2Insert a tape in the VCRTo stop recording, press the STOP/p button VCR records in a preset volumeRecording For recording options, see pagesPosition. The VCR/TV light will appear on the VCR display Recording One Channel/Watching AnotherPress the VCR/TV button to put the VCR in VCR Panel againTurn itself off When the OTR finishes, the VCR shuts itself offOne-Touch Recording Ton onceDo each step within 60 seconds of the previous step Timer RecordingSet the clock. Details are on DailyTimer Recording cont’d Instructions continue onCassette type/Playback Time This timeTape Speeds Tape Speed T160 T120 T60Checking or Cancelling Timer Recordings VCR 1 will play your tape. Put a prerecorded tape Rerecording Tape DuplicationMake the connections shown above VCRRepeat Play Real-Time Counter Memory Press the PLAY/o button to watch the tapeTime Search Press the Time Search buttonSuper High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Viewing a Still PictureAutomatic Operation Features Or Receiver Understanding On-Screen DisplaysMonitor Monaural SoundMulti-Channel Television Sound System MVR630MG only cont’d Hi-Fi Stereo Sound System MVR630MG only Please see additional notes onBlue Background Helpful Hints Helpful Hints cont’d Contact Magnavox Customer Care Center at Shipping charges to return defective productProduct sold AS is or Renewed English or Spanish SpeakingSpecifications Glossary / SpecificationsGlossary Remote control PowerTimer Record Audio in/out jacksSupplied Accessories