Magnavox MVR630MG, MVR430MG owner manual Timer Recording, Set the clock. Details are on, Daily

mvr630mg.QX33 2/11/02 12:05 PM Page 28

28 Timer Recording

Follow the steps below to program your VCR to record TV pro- grams while you’re away from home. The VCR will turn itself on, record, and turn itself off automatically. Before you begin:

●Set up the channels at the VCR. Details are on page 12.

●Set the clock. Details are on page 15.

●Put a tape in the VCR. Make sure the tape’s record tab is intact and the tape is long enough to record the program(s).

●Make sure the VCR is in VCR position. The VCR/TV light will appear on the display panel. If it does not, press the VCR/TV button once.

Do each step within 60 seconds of the previous step.

2-3

POWEREJECT

1 Press the MENU button.
SELECT op CHOOSE B		1
→	PROGRAM
	VCR SET UP
	TUNER SET UP
	SET CLOCK
TO END PUSH EXIT
Press the PLAY/o button or the STOP/p button to
2 select PROGRAM, then press the F.FWD/B button.
SELECT op CHOOSE B
→	ONCE
	DAILY
	WEEKLY
	PROGRAM REVIEW

TO END PUSH EXIT

		PLAY
REW				F.FWD
		STOP
MENU		STATUS/EXIT		CLEAR
1	2		3
4	5		6	CH
7	8		9

0

SPEED TIME SEARCH	STILL/PAUSE
REC/OTR MEMORY	SLOW

3 Press the PLAY/o button or the STOP/p button to select a ONCE, DAILY, or WEEKLY recording.Then, press the F.FWD/B button.

●ONCE: The VCR will record a TV program on any day you choose, up to 12 months away.

●DAILY: The VCR will record the same channel every day from Monday to Friday – starting at the same time and recording for the same length of time.

●WEEKLY: The VCR will record the same channel on the same day, at the same time, and for the same length of time every week.

Daily	DAILY PROGRAM (MON-FRI)
	PROGRAM -1 2 3 4 5 6 7 8-

Recording (example)

SELECT PROGRAM NUMBER

TO END PUSH EXIT

Helpful Hint

•If you need to make a correction while programming a timer record- ing, press the CLEAR button until the cursor is flashing on the item you want to change. Then enter the correct information.