Magnavox MVR430MG, MVR630MG owner manual Recording, To stop recording, press the STOP/p button

Page 25

mvr630mg.QX33 2/11/02 12:05 PM Page 25

Read and follow the steps below to record a television program.

1 Turn on the TV and set it to channel 3 or 4 - the channel to which the CH3/CH4 switch on the back of the VCR is set.

2 Insert a tape with its record tab intact in the VCR. If playback begins, press the STOP/p button to stop the tape.

3 If the VCR/TV light appears on the display panel, go to step 4. If the VCR/TV light does not appear, press the

VCR/TV button once.

4 Press the SPEED button repeatedly until the desired tape speed (SP or SLP) appears briefly on the screen. (Details about tape speed are on page 30.)

5 Use the CH(annel) o/p button or the Number but- tons to select the channel you want to record.

6 Press the REC(ord)/OTR button once to start recording. The RECORD light will appear on the display panel.

7 To pause the recording, press the STILL/PAUSE but-

ton once. The RECORD light will flash. To resume recording, press the REC(ord)/OTR button or press the STILL/PAUSE button again. The RECORD light will come on again.

8 To stop recording, press the STOP/p button.

Recording 25

1Turn on the TV.

2Insert a tape in the VCR.

 

3

 

VCR/TV

 

EJECT

 

 

8

 

PLAY

 

 

5

 

 

 

 

 

F.FWD

 

 

STOP

 

 

 

 

STATUS/EXIT

 

 

 

1

 

2

 

3

 

 

 

4

 

5

 

6

CH

 

 

 

 

 

 

 

7

 

8

 

9

 

 

4

 

 

0

 

 

 

7

SPEED

TIME SEARCH STILL/PAUSE

REC/OTR

MEMORY

SLOW

 

6

 

 

 

 

 

 

 

Helpful Hints

If you press the REC(ord)/OTR button when a tape is not in the VCR, NO CASSETTE will flash on the screen.

If you press the REC(ord)/OTR button while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CASSETTE CAN- NOT RECORD will flash on the screen.

For recording options, see pages 26-32.

You can change the tape speed dur- ing a recording, but some distortion will appear on the tape.

The VCR records in a preset volume.

If you used the AUDIO and VIDEO OUT jacks to connect the VCR to the TV, see page 10. You need to choose a channel other than 3 or 4 at the TV to see the VCR image on your TV.

Image 25
Contents MVR430MG/MVR630MG VCR Dear Magnavox product owner Warranty VerificationTable of Contents Safety Precautions FeaturesIntroduction Declaration of ConformityPutting Batteries in the Remote Control Before Using Your VCRBattery Safety VCR maintenanceDisconnect the antenna or cable from your TV Hookups Without a Cable Box/Direct Broadcast SystemCH3 CH4 Connections Hookups With a Cable Box/Direct Broadcast SystemRecording/Viewing Any Channel Connect a Cable signal to the VCR’s ANTenna in Jack Signal RF coaxial cable TV’s AntennaRecording One Channel/Watching Another MVR630MG Hookups with a Stereo TVPress the Menu button. The display shown below will appear Correctly. Details are on pagesPress the Menu button Automatic Channel SetupMVR630MG only Adding/Deleting Channels Automatic Channel Setup cont’dPress the STATUS/EXIT button once or twice to exit Reviewing Memorized ChannelsVCR may lose the clock setting if the power fails Setting the ClockButton Enter a 0 before a single-digit numberDaylight-Savings Time Press the STATUS/EXIT button Language SelectionRemote Control Buttons CHannel o/p Button Remote Control Buttons cont’dIf you select Status ON, then select Counter only OFF If you select Status ON, then select Counter only onIf you select Status OFF VCR Display Panel Front Panel Rear Panel Playing Other playback options and features are on pagesRead and follow the steps below to play a tape 1Turn on the TV 2Insert a tape in the VCRRecording VCR records in a preset volumeTo stop recording, press the STOP/p button For recording options, see pagesPress the VCR/TV button to put the VCR in VCR Recording One Channel/Watching AnotherPosition. The VCR/TV light will appear on the VCR display Panel againOne-Touch Recording When the OTR finishes, the VCR shuts itself offTurn itself off Ton onceSet the clock. Details are on Timer RecordingDo each step within 60 seconds of the previous step DailyInstructions continue on Timer Recording cont’dTape Speeds This timeCassette type/Playback Time Tape Speed T160 T120 T60Checking or Cancelling Timer Recordings Make the connections shown above Rerecording Tape DuplicationVCR 1 will play your tape. Put a prerecorded tape VCRRepeat Play Press the PLAY/o button to watch the tape Real-Time Counter MemoryPress the Time Search button Time SearchForward and Reverse Searching SP/LP/SLP Special Effects PlaybackSuper High Speed Searching LP/SLP Viewing a Still PictureAutomatic Operation Features Monitor Understanding On-Screen DisplaysOr Receiver Monaural SoundMulti-Channel Television Sound System MVR630MG only cont’d Please see additional notes on Hi-Fi Stereo Sound System MVR630MG onlyBlue Background Helpful Hints Helpful Hints cont’d Product sold AS is or Renewed Shipping charges to return defective productContact Magnavox Customer Care Center at English or Spanish SpeakingSpecifications Glossary / SpecificationsGlossary Timer Record PowerRemote control Audio in/out jacksSupplied Accessories