Magnavox MVR630MG Understanding On-Screen Displays, Monitor, Or Receiver, Monaural Sound

Page 38

mvr630mg.QX33 2/11/02 12:05 PM Page 38

38 Multi-Channel Television Sound System (MVR630MG only)

Your VCR can play recordings broadcast in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound from two sources. Your VCR also can play tapes recorded in a second audio (usually, that means your program is recorded in a second language). Of course, your VCR will play tapes recorded in monaural (single-source) sound as well.

Your VCR also will record in Hi-Fi stereo or in second audio, so when you play that tape on the VCR, it will be in stereo or second audio.

Read the directions on this page to familiarize yourself with your VCR’s stereo and second audio setups. Then follow the directions on page 39 to record in stereo or second audio and the directions on page 40 to play tapes recorded in Hi-Fi stereo.

Understanding On-Screen Displays

When you receive a signal from a channel you’re watching, portions of the on-screen display shown below will appear when you press the STATUS/EXIT button on the remote control.

The indication 2ND AUD or TV STEREO that appears on this side of the status display tells you if your VCR is receiving a second audio or stereo broadcast (as determined when you follow the steps on page 39).

Although a program may be broad- cast in both stereo and second audio, you cannot record in both stereo and second audio at the same time.

STOP		12:00 AM
TV STEREO		CH 02
		STEREO
		2ND AUD
SLP	1:23:45	HIFI

The indication 2ND AUD or STEREO that appears on this side of the status display tells you if the program you’re watching is available in second audio or stereo. This indication is not avail- able during tape playback.

Even though a program is available in stereo or second audio, you still must program the VCR to receive or record the program. Follow the directions on page 39.

To record and play programs broadcast in stereo, even if you have a single-speaker TV, just use one of the connections shown, then follow the steps on pages 39-40.

Stereo Amplifier	Single	Stereo	Monitor
or Receiver	Speaker TV	Speaker TV	TV

R

L

Audio cables from AUDIO OUT Jacks of VCR to AUDIO IN Jacks

of Stereo Amplifier or Receiver

OR OR

Monaural Sound

RF coaxial cable (supplied) from VCR’s

OUT Jack to TV’s ANTENNA IN Jack

OR

Video cable from VIDEO OUT Jack of VCR to VIDEO IN Jack of monitor TV

Image 38

Contents MVR430MG/MVR630MG VCR Warranty Verification Dear Magnavox product ownerTable of Contents Introduction FeaturesSafety Precautions Declaration of ConformityBattery Safety Before Using Your VCRPutting Batteries in the Remote Control VCR maintenanceHookups Without a Cable Box/Direct Broadcast System Disconnect the antenna or cable from your TVCH3 CH4 Recording/Viewing Any Channel Hookups With a Cable Box/Direct Broadcast SystemConnections Recording One Channel/Watching Another Signal RF coaxial cable TV’s AntennaConnect a Cable signal to the VCR’s ANTenna in Jack Hookups with a Stereo TV MVR630MGCorrectly. Details are on pages Press the Menu button. The display shown below will appearMVR630MG only Automatic Channel SetupPress the Menu button Automatic Channel Setup cont’d Adding/Deleting ChannelsReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitButton Setting the ClockVCR may lose the clock setting if the power fails Enter a 0 before a single-digit numberDaylight-Savings Time Language Selection Press the STATUS/EXIT buttonRemote Control Buttons Remote Control Buttons cont’d CHannel o/p ButtonIf you select Status OFF If you select Status ON, then select Counter only onIf you select Status ON, then select Counter only OFF VCR Display Panel Front Panel Rear Panel Read and follow the steps below to play a tape Other playback options and features are on pagesPlaying 1Turn on the TV 2Insert a tape in the VCRTo stop recording, press the STOP/p button VCR records in a preset volumeRecording For recording options, see pagesPosition. The VCR/TV light will appear on the VCR display Recording One Channel/Watching AnotherPress the VCR/TV button to put the VCR in VCR Panel againTurn itself off When the OTR finishes, the VCR shuts itself offOne-Touch Recording Ton onceDo each step within 60 seconds of the previous step Timer RecordingSet the clock. Details are on DailyTimer Recording cont’d Instructions continue onCassette type/Playback Time This timeTape Speeds Tape Speed T160 T120 T60Checking or Cancelling Timer Recordings VCR 1 will play your tape. Put a prerecorded tape Rerecording Tape DuplicationMake the connections shown above VCRRepeat Play Real-Time Counter Memory Press the PLAY/o button to watch the tapeTime Search Press the Time Search buttonSuper High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Viewing a Still PictureAutomatic Operation Features Or Receiver Understanding On-Screen DisplaysMonitor Monaural SoundMulti-Channel Television Sound System MVR630MG only cont’d Hi-Fi Stereo Sound System MVR630MG only Please see additional notes onBlue Background Helpful Hints Helpful Hints cont’d Contact Magnavox Customer Care Center at Shipping charges to return defective productProduct sold AS is or Renewed English or Spanish SpeakingGlossary Glossary / SpecificationsSpecifications Remote control PowerTimer Record Audio in/out jacksSupplied Accessories