Setting the Timer to Record Later
| ❺ ❺ |
|
|
|
|
|
| |
|
|
| 1 | 2 | 3 | 4 | 5 |
|
POWER |
|
|
|
|
|
| DSP |
|
|
|
|
|
|
|
|
| |
|
| COPY | 6 | 7 | 8 | 9 | 0 |
|
|
|
|
|
|
|
|
| |
TV/VCR |
| TAPE▲ |
|
|
|
| LCV | CH |
CTR | UP | RESET 1 | STOP/EJECT | 2 | STOP/EJECT | |||
PREV | NEXT |
| PLAY |
|
| PLAY |
| |
| DOWN |
| REW | FWD | PAUSE | REW FWD | PAUSE | |
MENU | SAVE | ESC | SOURCE | REC |
| SOURCE | REC | |
|
|
|
|
|
| TV |
|
|
|
|
| DECK 1 | DECK 2 | VIEW | TUNER | AV•IN | |
|
|
|
| |||||
Set the Hour the event will be recorded.
Set the Minute the event will be recorded.
Set AM/PM. Use the Up/Down buttons or press 1 for AM, 2 for PM.
Set the Deck on which the event will be recorded.
Set the number of Hours of the recording. You can select up to 9 hours and 59 minutes.
Set the number of Minutes of the recording.
Set the Channel (or
Set the event Type. NRM (Normal) records one event one time only; use it for a movie or football game, for example. DLY (Daily) records one event at the same time every weekday; use it for soap operas or the news. WKY (Weekly) records one event at the same time every week; use it for a weekly series. Daily and weekly recordings begin on the date set.
Set the recording Speed. Use the Up/Down buttons or press 1 for SP, 2 for LP, 3 for EP. See page 23 for an explanation of speeds.
▲If desired, press Reset to return all selections in this menu to their original settings and restart step p . You can do this at any time.
To be able to record Simulcast or SAP broadcasts, use the Audio Menu to place the tuner in the appropriate mode. See page 24. When Simulcast is active, “SC” will appear after the channel number in both the Timer Recording Summary and the Timer Recording Menu. ▲
òPress Save to accept your settings and return to the Timer Recording Summary. You can do this at any time.
OR
Press Escape to cancel any changes to this event and return to the Timer Recording Summary. You can do this at any time.
You can now review the settings you have just programmed. To change any settings, repeat steps Õ through ò . You will not be able to change any event that is in progress.
To erase an event, use the Up/Down buttons to highlight the event and press Reset. If the event is in progress, it will immediately stop.
❻Press Save or Escape to leave the Timer Recording Summary then press Save or Escape again to exit the Main Menu.
£Insert a tape into Deck 1, Deck 2, or both, whichever the timer is programmed to record on.
20