GoVideo GV2020 manual Playing Tape, Record Safety Tab

Playing

a Tape

Record Safety Tab

				❹
				❺	❸
			1	2	3	4	5
POWER							DSP
		COPY	6	7	8	9	0
TV/VCR		TAPE ▲					LCV	CH
CTR	UP	RESET	1	STOP/EJECT		2	STOP/EJECT
PREV	NEXT			PLAY			PLAY
	DOWN		REW FWD		PAUSE		REW FWD	PAUSE
MENU	SAVE	ESC	SOURCE		REC		SOURCE	REC
						TV
					VIEW
			DECK 1		DECK 2		TUNER	AV•IN

POWER
STOP	PLAY	REW		FWD
EJECT
SOURCE	DECK 2 TUNER AV•IN
TRACKING SHARPNESS	MENU	PREV	SAVE	N

	LEFT RIGHT LEFT		RIGHT
	AUDIO IN	AUDIO OUT
	VIDEO	STILL-TRACKING
IN	OUT	DECK 1	DECK 2

12

To play a tape on your VCR-2 follow these five simple steps.

①Optionally remove the record safety tab from your prerecorded tape.

¹Insert this tape into Deck 1 or 2.

If your VCR-2 power is off it will now automatically turn on.

Your VCR-2 has an Auto Play feature which automatically plays tapes that have the record safety tab removed. If Auto Play is off, press Play for the deck containing the tape.

The TV/VCR indicator automatically switches to VCR.

ÕPress Pause if you wish to freeze the picture. PLAY will blink on the Front Panel Display.

Press Play to continue play.

pPress Stop/Eject once to stop the tape.

òPress Stop/Eject again to eject the tape from the deck. If using the Remote Control, the Remote Load/Eject feature must be on. See page 23.

▲Removing the record safety tab prevents accidental recording over prerecorded scenes.

See pages 23 and 30 for an explanation of Auto Play.

While in play, press Fast Forward for forward Picture Scan. FF will blink on the Front Panel Display. Press Rewind for reverse Picture Scan. REW will blink on the Front Panel Display. Press Play to end forward or reverse Picture Scan and resume play.

While in play, press Fast Forward twice for forward Jet Search. FF will blink on the Front Panel Display. Press Rewind twice for reverse Jet Search. REW will blink on the Front Panel Display. Press Play to end forward or reverse Jet Search and resume play.

A certain amount of noise (white streaks across the picture) may appear when a tape recorded on one VCR is played on a different one. You can adjust the Tracking control on your VCR-2 Front Panel to minimize this noise while playing a tape. There are separate controls for Decks 1 and 2.

You can adjust the Sharpness control on your VCR-2 Front Panel to soften or sharpen the picture to your viewing preference. There are separate controls for Decks 1 and 2.

You can adjust the sharpness of the freeze-frame picture while a tape is paused by turning the Still-Tracking control (on your VCR-2 back panel) for the deck you are viewing. There are separate controls for Decks 1

and 2. ▲