GoVideo GV2020 manual On-Screen Programming Set Date and Time

On-Screen

Programming

Set Date and Time

You must set your VCR-2 clock and calendar before using Timer Recording. Your VCR-2 will accurately maintain its calendar up to December 31, 2090 once you have set the date and time, unless power is interrupted. The clock must be reset after a power interruption.

¶Press Menu. The Main Menu will appear on your TV screen.

❶ ❸ ❹				❸❷
			1	2	3	4	5
POWER							DSP
		COPY	6	7	8	9	0
TV/VCR		TAPE▲					LCV	CH
CTR	UP	RESET 1	STOP/EJECT			2	STOP/EJECT
PREV	NEXT			PLAY			PLAY
	DOWN		REW	FWD	PAUSE		REW FWD	PAUSE
MENU	SAVE	ESC	SOURCE		REC		SOURCE	REC
						TV
			DECK 1		DECK 2	VIEW	TUNER	AV•IN

åPress 3 to select Set Date and Time. The Set Date and Time Menu will appear on your TV screen.

▲From this point, you will not be able to change channels until you return to the Main Menu. ▲

ÕUse Previous and Next to move from one selection to another. Use the Numeric buttons (or the Up/Down buttons) to change the setting for any selection.

Set the Month. January is 01, October is 10, etc.

Set the Year. Enter only the last two digits: 91, 92, 93, etc. Set the Day.

Set the Hour.

Set the Minute.

Set AM/PM. Use the Up/Down buttons or press 1 for AM, 2 for PM.

▲If desired, press Reset to return all entries to current time and continue with step Õ. You can do this at any time. ▲

pPress Save to accept your settings and return to the Main Menu. You can do this at any time.

OR

MAIN MENU

1:VIDEO MENU

2:AUDIO MENU

3:SET DATE AND TIME

4:TIMER RECORDING

5:CHANNEL/TUNER MENU

WHEN OK PUSH SAVE

SET MONTH :

J U N E 1991					1:00 PM
SU	MO	TU	WE	TH	FR	SA
						1
2	3	4	5	6	7	8
9	10	11	1 2	13	14	15
16	17	18	19	20	21	22
2 3	2 4	2 5	2 6	2 7	2 8	2 9
3 0

WHEN OK PUSH SAVE

Press Escape to ignore any changes you have made and return to the

Main Menu. You can do this at any time.

▲ The current time and day will appear on the Front Panel Display. The current time and date can also be seen on the On-Screen Display.

Use a preceding zero (0) before single digit entries or press Next after the
first digit. ▲	25