GoVideo GV2020 manual Cable Outlet Converter

Cable

Connection 2

You can use this connection if you have a converter with your cable system.

You can record any scrambled or non-scrambled channel and watch that channel.

Your VCR-2 can be turned off during normal TV viewing.

To record and view a scrambled or non-scrambled channel, follow these instructions.

①Turn on your TV, VCR-2, and converter.

¹Use the Channel Up/Down buttons to set your VCR-2 to channel 2, 3 or 4, whichever is used by your cable system. You may view this channel selection on the Front Panel Display of your VCR-2.

③Set the VCR-2 back panel switch to either channel 3 or 4, choosing the one that you did not use for your cable system (in ¹ above).

④Set your TV tuner to the same channel used in ③ above.

▲The above instructions apply when your VCR-2 is on. If you wish to

view your cable system when your VCR-2 is off, set your TV tuner to channel 2, 3 or 4, whichever is used by your cable system. ▲

¥On the cable system converter, select the channel to view or record. Start the recording (page 14). Make sure the converter is left on during the recording.

Coaxial Cable

CABLE

OUTLET

CONVERTER

			Dual-Deck
			VCR Cable
			(supplied)
			VHF/UHF
CH 3	OUT TO TV
CH 4
		VIDEO
	ANTENNA/		TV BACK PANEL
	IN FROM: CABLE	OUT
	IN

DUAL-DECK VCR BACK PANEL

35