On-Screen Display | GoVideo GV2020 manual

On-Screen

Display

DECK 1	TV VIEW	DECK 2
RECORD	DECK 1	PLAY	Deck Status
0000		2562	Deck Status
0000		2562
SP M		SP M	AmeriChrome Copy™
			Indicator
			Source
			Source
			Indicators
SOURCE		SOURCE	Indicators
SOURCE		SOURCE
DECK 2		TUNER

DECK 1		TV VIEW	DECK 2
STOP		DECK 1	PLAY
0000			2562
		CH 03

SP M
	HQ COPY		SP M

MON MAY 14, 1991 12:00PM

TV View Indicator

Channel Indicator

Date/Time

The On-Screen Display (OSD) appears on your TV screen when any button affecting the tape status, channel setting, Copy Tape™, Source, or TV View is pressed. Some parts of the OSD will not appear depending on the current status of your VCR-2. For example, if either deck does not contain a tape, deck status will not appear for that deck.

The OSD can also be displayed by pressing DSP (Display). The first press will display the date and time. The second press will clear the screen. Press a third time to display the source of the deck signals. The OSD will not be recorded by either VCR-2 deck. You can clear the OSD anytime it is on by pressing DSP.

Channel Indicator - Displays the current channel selection for your VCR-2 tuner. Displays SC next to the channel when Simulcast is chosen as the Audio Source.

Deck Status - Displays the tape status: Eject, Stop, Play, Still, Fast FWD, Rewind, FPS and RPS (Picture Scan), Jet FPS and Jet RPS (Jet Search), Pause, Record, Load, or Error. Also displays the current Tape Counter position, the tape speed, and M if the Memory Stop mode is active. OTR and duration are displayed when One-Two Recording™ is in progress.

AmeriChrome Copy™ Indicator - Indicates that AmeriChrome Copy duplication is in progress.

Source Indicators - Indicate the source for recording onto Deck 1 and Deck

2.Press the Deck 1 Source button to select AV-IN, Tuner, or Deck 2 (Deck 1 cannot record itself; Deck 2 cannot record itself). Change the Deck 2 Source in the same manner.

If Deck 2 is chosen as the Source for Deck 1, then Deck 1 cannot be selected as Source for Deck 2. The reverse is also true.

TV View Indicator - Indicates the source of the picture on your TV screen when the TV/VCR button is set to VCR. If TV View is set to Deck 1 or Deck 2 and no tape is playing in that deck, you will instead see that deck’s Source. For example, if TV View is set to Deck 1 and no tape is playing in Deck 1, you will see the Deck 1 Source, which may be Deck 2, tuner, or AV-IN.