LG Electronics AF115 owner manual Connecting to a DVD, Connecting to a D-TV Set-Top Box

Connection

Connecting to a DVD

* The output jacks (Y, PB, PR) of the DVD might be labelled as Y, Pb, Pr / Y, B-Y, R-Y / Y, Cb, Cr according to the equipment.

< How to connect >

a.Connect the DVD component cable to the Y, PB and PR of

the COMPONENT IN of the projector.

* When connecting the component cable, match the jack colors with the component cable.(Y=green, PB=blue, PR=red)

Component cable

Y P P

<DVD>

b. You may use HDMI instead of component if available on the DVD player. HDMI supports better quality than component.

Signal	Component	HDMI
480i	O	X
480p	O	O
720p	O	O
1080i	O	O
1080p	O	O
576i	O	X
576p	O	O

Connecting to a D-TV Set-Top Box

*To receive D-TV programs, it is necessary to purchase a D-TV receiver (Set-Top Box) and connect it to the projector.

*Please refer to the owner's manual of the D-TV Set-Top Box for the connection between the projector and D-TV Set-Top Box.

< How to connect a HDMI source >

a.Connect the HDMI IN of the projector and the HDMI output port of the DTV set-top box with an HDMI cable.

b.Set the DTV receiver's resolution to one of the following: 480p(576p)/720p/1080i/1080p mode.

< How to connect a Component source >

a.Connect the component cable connected to the DTV set-top box

to the Y, PB and PR of the COMPONENT IN of the projector.

*When connecting the component cable, match the jack colors. (Y=green, PB=blue, PR=red)

<D-TV Set-Top Box>

Y P P

HDMI Cable

Component cable

Y P P

<D-TV Set-Top Box>

19