LG Electronics AF115 owner manual Regarding the projector lamp control

Information

Regarding the projector lamp control

WARNING

●Don’t turn off the projector at least in 5 minutes after activating it.

-The frequent On/Off changes may cause the lamp to deteriorate.

●Don’t pull out the power cord while the projector or the cooling fan are running.

-It may shorten the life of the lamp.

●The life-span of depends on the environment its used in and how well its treated.

●The projector uses a high pressure mercury lamp. Shock or abuse to the projector can cause the lamp to burst.

●Continuing to use a lamp the projector has indicated needs replacement may burst.

●If the lamp burst, perform the following:

-Remove the power cord immediately.

-Let some fresh air in immediately (Ventilation).

-Have a service center check the projector's condition and replace the lamp.

-Do not disassemble the projector.

34