Names of parts
Projector Status Indicators
* Lamp indicator, operation indicator and temperature indicator at the top of the projector show the user the operating status of the projector.
Operation Indicator
Temperature Indicator
D
< <
| n |
o | w |
|
Lens
shift
> >
U
p
Deco LED
(Lens Shift Dial)
Lamp Indicator
|
| Red | Standby. | |
|
|
|
| |
|
| Green | Unit is in operation (Lamp is turned on) | |
|
| Orange(flashing) | The lamp is cooling (60 seconds). | |
|
| Green (flashing) | The projector has been turned off due to excessive heat | |
Operation Indicator |
| (60 seconds). | ||
|
| |||
Off | Power off. | |||
/ Temperature Indicator |
| |||
| Orange | This is the warning message of excessive heat when the | ||
|
| |||
|
|
| projector is on. | |
|
|
| Turn the projector off and check the ventilator. | |
|
| Red(flashing) | Power has turned off due to problem with the internal | |
|
|
| cooling fan. Contact your service center. | |
|
|
|
| |
|
| Red | Projector lamp is reaching the end of its life and needs | |
|
|
| to be replaced with a new lamp. | |
|
|
|
| |
Lamp Indicator | Red(flashing) | An error has occurred in the projector lamp. Turn the pro- | ||
| jector on again after sufficient amount of time. If this indi- | |||
|
|
| ||
|
|
| cator flashes red again, contact your local service center. | |
|
|
|
| |
|
| Green (flashing) | The lamp cover and filter cover is opened. | |
Deco LED | Blue (flashing) | Lamp is starting up. | ||
(Lens Shift Dial) |
|
| ||
11
