To connect your VCR-2 to your TV, follow these four simple steps. More advanced connection instructions begin on page 32.
①Place your VCR-2 next to your TV and plug the VCR-2 power cord into a wall outlet.
åDetach the antenna cable from your TV (it will be either a round coaxial cable or a flat twin-lead cable). Attach this cable to the In from Antenna/ Cable connection on the back panel of your VCR-2. If your antenna cable is twin-lead, use the supplied adapter.
ÕA cable is supplied with your VCR-2. Connect the coaxial (round) end of this cable to the Out to TV connection on your VCR-2 back panel. Connect the other end of the supplied cable to the antenna connection on the back of your TV.
Depending on the type of antenna connection your TV has, you will connect either the round coaxial connector or the twin-lead connectors. If your TV has both types of connections, use the coaxial connection. You should not connect both.
pSet the CH 3/CH 4 selector, which is located on the back panel of your VCR-2. It is preset to channel 3. To avoid interference from a local station you should choose the channel that is not normally used in your area.
