3-5.A/CHEADASS'YREMOVAL(See Fig.3-10)
a. Remove one nut hex 
from the A/C HEAD POST 
of the MAINBASE.
b. Remove the A/C HEAD ASSEMBLY
from the MAINBASE.
c. Remove the A/C HEAD SPRING 
from the
A/C HEAD ASSEMBLY .
NOTE:
After reassembling, adjust the TAPE TRANSPORTING SYSTEM refering to chapter 5 "ADJUSTMENT OF THE TAPE TRANSPORTING SYSTEM".
After adjusting the TAPE TRANSPORTING SYSTEM, spread the A/C HEAD/NUT, AZIMUTH SCREW, and TILT SCREW with LOCKING PAINT.
3-6.L/CBRACKETASS'YREMOVAL(See Fig.3-11)
a. Remove one screw 
from the L/C BRACKET ASSEMBLY 
.
b. Remove the L/C BRACKET ASSEMBLY 
from the MAINBASE.
3-7.PINCHLEVER
TOTALASS'YREMOVAL(See Fig.3-11)
a. Remove one POLY WASHER 
from the PINCH LEVER POST of the MAINBASE.
b. Unhook the PINCH LEVER SPRING 
from the hook of MAINBASE 
and remove the
PINCH LEVER TOTAL ASSEMBLY 
.
CAUTION:
Take care not to coat GREASE, OIL or other substances on the surface of the PINCH ROLLER .
17