Fujitsu PG-DTA101 manual Load Fail Flashing

Load Fail:	E	Flashing	A load command has failed, or a load or change par-
Press Eject			titions command has failed to read the system area
			of the tape, which stores information about tape
			usage.
			Action: Press the Eject button.
Load Lock	I	—	Manual loading is locked (The PREVENT MEDIA
			REMOVAL command is in operation).
Load Tape	I	—	This is displayed when you press the Load Tape but-
			ton.
Loading	S	—	Either a cartridge is being moved from the magazine
			and placed into the drive mechanism, or the drive is
			loading a cartridge.
Locate	S	—	The drive is moving the tape to the point specified
			by the host.
Mag Check	S	—	The autoloader is examining the magazine to deter-
			mine which slots are occupied.
Mag Eject	S	—	The autoloader is ejecting the magazine.
Mag Loaded	S	—	A magazine is present in the autoloader and the
			magazine check has been carried out.
Media Removal	E	On	An eject command has been attempted when a
Prevented			PREVENT MEDIA REMOVAL command is in opera-
			tion.
			Action: Try ejecting again after sending an ALLOW
			MEDIUM REMOVAL command, or after resetting or
			power-cycling the autoloader.
New FW!!!!	S	—	The firmware upgrade process has been success-
			fully completed.
No EODmark	E	Flashing	The drive is trying to read what appears to be a
			blank tape (one with no DDS-format EOD pattern).
			This is probably the result of a power failure while
			the drive was writing data.
Partition	S	—	The drive is switching to the other partition on a two-
			partition tape.
Partition 1 too	E	On	A command to format the tape has failed because
large			the requested size for partition 1 is too large.
			Action: Try again with a smaller partition 1, or, if pos-
			sible, use a larger capacity tape.
Press Eject	I	—	Press the Eject button.
Read	S	—	The drive is reading data from the tape.
Read Fail	E	Flashing	A read attempt has failed. The tape needs to be
			repositioned before you try again.
Rewind	S	—	The drive is rewinding the tape to the beginning of
			the partition.

24