Fujitsu PG-DTA101 manual Appendix LCD Messages

Eject fail	E	Flashing	Cartridge ejection failed either after you pressed the
			Eject button or after issuing an eject command.
			Action: Try forcing ejection.
Eject Mag	I	—	This is displayed when you press the Eject button.
Erase	S	—	The drive is erasing data from the tape.
Error X	E	Flashing	This is a hardware error. The variable X stands for
			the value indicating the type of error it is.
			Action: Press the Eject button to attempt to recover
			the cartridge and the magazine. If the problem per-
			sists, note the value of X and call for service.
ForceEject	I	—	A forced ejection is in progress.
Format	S	—	A SCSI command for generating a one- or two-parti-
			tion tape is being executed, or the drive is changing
			the size of the partitions on an existing two-partition
			tape.
FW Check	S	—	Firmware upgrade data is being checked for com-
			patibility.
FW Data Err	E	Flashing	The autoloader has failed to upgrade the drive firm-
			ware, because the new firmware is corrupt.
			Action: Obtain a good copy of the firmware upgrade.
FW Program	S	—	The drive is being upgraded with the new firmware.
FW Tape	S	—	The cartridge loaded in the drive mechanism is a
			firmware upgrade tape cartridge.
FW Upgrade	S	—	Firmware upgrade data is being read from a tape.
FW Read Fail	E	Flashing	A firmware upgrade failed because of an error in
			reading data from the tape.
			Action: Try upgrading the firmware again. If it still
			fails, call for service.
FW Tape Write	E	Flashing	A firmware upgrade failed because the tape is write-
Protected			protected.
			Action: Disable write-protect on the tape and try
			upgrading again.
FW Write Fail	E	Flashing	A firmware upgrade failed because of an error in
			writing a modified upgrade count to the tape.
			Action: Try upgrading the firmware again. If it still
			fails, call for service.
Insert Mag	S	—	The autoloader is waiting for you to insert a maga-
			zine.
Load Fail:	E	Flashing	A load command has failed, or a load or change par-
Try New Tape			titions command has failed to read the system area
			of the tape, which stores information about tape
			usage.
			Action: Use a new cartridge.

Appendix LCD Messages 23

E