JVC VR-716E Presensor Recording Preset Values Actual Recording Duration, Settings, 113

Presensor Recording

Presensor Recording is a feature that works hand-in-hand with Sensor Recording that starts recording automatically by tracing back to the time prior to the input of alarm signals. Set this in the “PRESENSOR REC” and “PRESENSOR REC DURATION” items of the “ALARM/SENSOR MODE” Menu. Refer to ‘Changing Menu Settings’ on page 22.

<Example>

Perform a 30-second presensor recording when in the Sensor Recording mode.

ALARM/SENSOR MODE
1.BLOCK	1
2.REC MODE	ALARM
3.FRAME RATE	25 IPS
4.QUALITY	H
5.DURATION	180SEC
6.AUDIO REC	OFF
7.PRESENSOR REC	ON
8.PRESENSOR REC DURATION	30SEC
9.EXT INPUT OPERATING MODE	OFF
10.MOTION DETECT	OFF
11.MOTION DETECT SETTING

<Presensor Recording Preset Values

and Actual Recording Duration>

Settings	Actual Recording Duration
10 seconds	10 ~ 20 seconds
20 seconds	20 ~ 30 seconds
30 seconds	30 ~ 60 seconds

Sensor recording in

standby modeAlarm (stop mode)

Presensor	Event (Sensor)
Presensor recording	Sensor recording

30seconds

Sensor recording starts at the same time when alarm signals are received. Upon the start of sensor recording, presensor re- cording will also start recording automatically for a 30-second interval.

•A few frames will be left out between presensor and sensor recording.

•The portion recorded by presensor record- ing cannot be retrieved by alarm/sensor search.

•Presensor recording may be split up into 2 segments, depending on the input timing of the alarm signals. In this case, 2 presensor recording data will exist with respect to 1 sensor recording when search is performed on the Web. In addition, image may freeze for an instant at the interface of the 2 presensor records.

113