JVC VR-716E instruction manual Mounting to a Rack, Turning On/Off the Power

Page 15

Mounting to a Rack

Make use of the rack-mounting bracket provided when mounting VR-716 to the EIA rack.

1

3

Rack-mounting

Bracket

1. Mount the rack-mounting bracket to VR-716 us- ing Screw 1

• Fasten the two sides of VR-716 using the 4 screws provided (M4 x 10 mm).

3	1

2 (4 corners)

Caution

•Do not place any object on VR-716 that has been mounted onto the rack. This may cause the rack to give way and lead to inju- ries or equipment damages.

•When mounting 2 or more VR-716 record- ers on racks, ensure that they are mounted at least 1 unit away from one another.

2. Remove Screw 2 (4 corners) on the foot stand at the bottom surface of the equipment

•Remove the foot stand.

3.Mount VR-716 to the rack using Screw 3

•Fasten the equipment to the rack using the 4 screws provided (M5 x 10 mm).

Turning On/Off the Power

Notes

•Refer to page 62 ‘External Hard Disk Drives’ when adding external HDDs.

•Operation of power is disabled during sys- tem checks.

Do so after the “SYSTEM CHECKING...

PLEASE WAIT…” display disappears.

Caution

•Turn ON the power of this equipment only after connections with all peripheral devices are completed.

•Do not unplug the power cord when start- ing up this equipment. This may cause the equipment to malfunction.

[OPERATE]

				CANCEL	SEARCH	MENU		HDD	OPERATE
1	2	ALARM	5	6			REV	FWD
		SENSOR					REV	FWD

3	4	ALARM	7	8				TIMER		LOCK
		SENSOR						TIMER		LOCK
9	10	ALARM	13	14							OUT
		SENSOR						DISPLAY	EXECUTE		OUT
				SEQUENCE				DISPLAY	EXECUTE	VIDEO	AUDIO
				MULTI	REC	STOP	PLAY	STILL
11	1	ALARM	15	16						SKIP
		SENSOR

Front Display

Note

•Press the [OPERATE] button once when in the OFF state to turn ON the power.

Caution

•Unplug the power cord only when the power of the equipment is OFF. If the power cord is unplugged when the equipment is in ON state, it will take time to perform a hard disk check when it is turned on again. It may take a long time when the data is fragmented or when there is a large amount of recorded data.

⬛Turning ON the Power

1. Connect the power cord

•Use the power cord supplied to connect to an AC 220 V - 240 V, 50 Hz/ 60 Hz outlet.

•This turns ON the power and starts the system check.

<Monitor>

SYSTEM CHECKING...		PLEASE WAIT...

<Front Display>

⬛Turning OFF the Power

1. Press the [OPERATE] button for about 2 seconds

•The front display shows [BUSY] and switches to a dim clock display. (OFF State)

<Front Display>

OPERATE

2. Unplug the power cord

15

Image 15

Contents Please read the followings before getting started VR-716EFor Continental EUROPE, ETC. Not to be used in the U.K For Your Safety AustraliaImportant In the United Kingdom Mains Supply AC 230 Connection to the mains supplyHandling the unit Place of storage and useRoutine Uses of the Web Browser What is a Web Browser?Connecting to a Web Browser and Setting Up Useful Browser FeaturesHow to Use the Operation Lock Main FeaturesPrecautions Names and Functions Front $ Search Button Timer Button@ Menu Button # Cursor Control ButtonsNames and Functions Rear Names and Functions Signal In/Out Terminal Terminal Signal Level Remarks Names and Functions Front Display Remaining Hard Disk Space Display Example 1234 hours left Counter/Setting Display105 ‘Problems Related to Error Code and Onscreen Display’ Clock Display Example 123456, 1 MarchAudio Video System Connection When Connecting 16 CamerasAlarm COM ExampleMounting to a Rack Turning On/Off the PowerSelect the Clock SET item using / and press Setting the Date/TimeOnscreen Setting Using the Monitor Screen Time Zone Setting Press the Menu buttonPress Menu to end setting Clock Setting Press the Menu buttonSelect the Clock SET item using Press and turn the jog dial to adjust M MonthPress the button Setting Using the Front DisplayAdjust H Hour and M Minute Press the Display button for 2 seconds or longerOnscreen Display Menu Flow Chart Weekly Timer Menu Program Timer MenuSingle Picture Mode Menu Motion Detect Setting MenuTurn the jog dial to select a value Changing Menu SettingsChanging Initial Settings Select menu item usingFDP Menu Onscreen Mode MenuSettings Description Are factory settingsBuzzer Menu REC Mode MenuCamera Title Menu Operation MenuEXT REC Menu Monitor Display Menu ALARM/SENSOR Mode Menu Motion Detect Setting Scene Standard ING ModeTimer Timer NormalSetting is disabled when in the Recording mode Program Timer MenuMonth Start Date D Date TimerExec Start Date MNetwork Menu Disk UTILITY/MAINTENANCE MenuEE OUT Terminal When connecting the monitor to the EE OUT terminal Displaying in the 16 Split Screen Mode Viewing Live Camera ImagesTons When connecting the monitor to the Video OUT terminal The following screen will be displayed on Monitor upon pressing the ‘Camera Selection’butMonitor display time Move the cursor to = Return using and pressPress Sequence Multi to select the Single Picture mode Press to select a camera noBlock 3SEC Press to select a block under the Quad Picture Mode itemPress Sequence Multi to select the Quad Picture mode BlockMain menu items related to recording Recording in the Normal ModeRecording Camera Images Press the REC buttonRepeat REC OFF Repeat Recording Repeat Record FeatureTurn the jog dial to select the mode of repeat recording Press to select Repeat REC itemViewing Recorded Images Press the ‘Camera Selection’ button Press the ‘Camera Selection’ button againMonitor will display in quad picture Press and turn the jog dial to select a M Month value Move the cursor to DATE/TIME Search using and pressSearching Image According to Date/Time DATE/TIME Search Turn the jog dial to select a D Day valueHow to clear the Alarm Record List Move the cursor to ALARM/SENSOR Search item using and press Turn the jog dial Adjusting Playback Speed Jog/Shuttle PlaybackWhen in the Playback mode Turn the shuttle dialPress the Skip button when in the Playback mode Viewing Recorded Images in the Skip ModePress to select the Skip Mode item Turn the jog dial to select a Skip modePress and hold the Still button for a while Enlarging the Still Image Still Image ZoomPlayback the image Press the Still buttonVertical and horizontal directions can Scroll using the / / / buttonsEach time the Still button is Pressed, x2 Zoom or x4 Zoom in bothRecord Programming Using the Program Timer Turn the jog dial to adjust the starting day to FRI FridayPress to select the line for which program is to be set This displays the Program Timer Menu screen Press Menu to return to the normal screen, and press TimerTurn the jog dial to select DAY ScreensTo set the minute value of the ending Time, press This displays the Program Timer Press to move the cursor to the final lineMaximum duration of nonstop recording is less than 24 hours Minute position and adjust by turning Recording Mode Cameras 1= Return Cancelcancel To select the line Date TimerPerform setting for other Press9.10 Timer indicator on the front display lights upPress To select Canceling a Record ProgramPress to select the record program to delete Changing a Record Program Press the Menu buttonTurn the jog dial to select on Hard Disk MaintenanceScanning Hard Disk Data Auto Scan Disk Press to select the Auto Scan Disk itemPress to select Manual Scan Disk item This starts the scanningManual Scan Disk Press the Execute button again Select the Defrag DA Tabase item using PressDisk UTILITY/MAINTENANCE Menu and the Disk Utility DefragFormat Select the Format item Using PressInitializing the Hard Disk Format This displays the Format Confir Mation ScreenHard Disk Mirroring This displays the Power Outage Time List To view the list of Power Outage Recovery RecordsConnection Series Recording Using 2 or More VR-716 RecordersActivation of Recording Via External Signals SettingWhen connecting to multiple hard disk drives Turn OFF the powerConnect the external hard disk drive and turn on the power Turn on the power of VR-716Hard disk drives are now usable Hard Disk Recovery FeatureThis displays the Confirm HDD Reconfiguring Screen Press the Operate buttonSelect the DVD-RAM Copy item using and press Copying to DVD-RAMCopying to DVD-RAM RAM Select Copy Start usingPress Execute Press the Execute button againTypes of Record Modes Activation of Recording Via External Alarm/Sensor SignalsALARM/SENSOR Press to select the Block itemNotification During Alarm Recording or Sensor Recording Press and turn the jog dial to set a value for each item Using the Motion Detect FeatureSelect the Motion Detect Setting item us- ing and press Turn the jog dial to select a blockHow to set manually Press to move the cursor to Area SET- TingSENSITIVITY, Termination Sensitiv Check mode Motion detect check mode and setting guidanceNotification of Power Outage Continuing with Recording Upon Recovery from Power FailurePress to select the Recovery REC item Turn the jog dial to select an operating modeTurn the jog dial to select a character Setting a Title for Each Camera Channel ScreenTurn the jog dial to set Block to Press to select the Camera 1 Title itemBackup of menu settings You can do the followingsLAN Terminal Other Cautions Minimum PC Specifications RequiredSet the IP address Set the Subnet mask Setup FlowConnecting Login to the Network Set the IP Address Set the Netmask Set the Default GatewayWhat is peer-to-peer? Connecting Using a LAN CableConnecting to a LAN Network Connecting to a Peer-to-peer NetworkSetting Up a Network for VR-716 Press ButtonWork Right-click on My Network Places and select Properties Setting Up a PC Network Windows XPWhen Using Windows XP Click the button ExampleRight-click Local Area Connection and click Properties Setting Up a PC Network WindowsWhen Using Windows Click the button Select Local Area ConnectionSetting Up a PC Network Windows 2000/XP Select Internet Protocol TCP/IP and clickClick on the Local Area Connection Prop- erties screen Enter admin lower case Enter vr-716 lower case Click OK Connecting Login to the NetworkEnter the login password for VR-716 Enter the IP address factory setting Click GoClick z Set the camera title Click the Check box Enter charactersClick Save SPE REC Speed QUL REC Quality AUD Audio REC Record Program Using the Program Timer Setting ScreenDisplay Area in Program List for WeeklyTimer Click z zREC Speed REC Quality Audio REC Recording ModeSet to the Program Timer Standby mode REC SpeedExample Execute recording from 800 a.m. ~ 500 p.m. everyday Program List for Weekly TimerPress UP to change and DEL to clear preset values Program List for Weekly TimerClick UP to update setting for the Program No. selected REC Speed Do not Record REC Quality Audio REC Program List for Date TimerClick Setting VR-716 to the Program Timer Standby ModeTo undo the Timer Standby mode, click Click Timer ModeClick After Release Operation after Release Timer StopContinue StopWeekly Timer Setup Changing/Deleting Record Programs in the Program TimerWeekly Timer Programs Click z z Date Timer Programs Click z zSelection items for Searching Alarm/Sensor recording Click z zSearching Image According to Date/Time Event Search Click the button for the event to be viewedInput date of the image to playback Search By Date/Time Click z zTo view a particular event, click the button for that event Duration ChannelSearch By Term Click z z This opens up the Viewer window and starts playback.All Event REC Displays events of all re- cording data Click z Restricting Access to VR-716 Viewing the List of Registered Access Users Click z 2 user names below are included in the factory settingsWorkgroup Restricting Access to Recorded Image Files at VR-716Share ShareChanging Network Settings of VR-716 from PC Click Test E-MAIL Mail Notification Setting During Alarm/Sensor InputSelect a Mode ServerMail Header Message Normal List FormatMessage Short List Format Names and Functions Recording ModeViewing Images of Event Search Results Simple Viewer Search for an eventSwitching between quad picture and single picture modes FunctionsDisplays the operational status of the Web Viewer Succeeded Saving VR-716 Settings to a FileWait for a while for the backup data to be created NOW Reading the Data102 Click SaveSpecify a location on the PC for the data to be saved Download completedClick Exec Uploading VR-716 SettingsSpecify the backup data file to upload from the PC Click Update after specifying a backup data fileInformation About Open Source Software 104Click Open Refer to TroubleshootingProblems Related to Error Code and Onscreen Display Error Code Onscreen Display Cause ActionOther Problems Symptom Cause Action Refer to106 Troubleshooting on Use of Browsers Symptom Cause Action107 Troubleshooting on Use of Web Browsers Authentication Procedure108 Other Messages Displayed Message Cause Action109 IP addresses assigned by the PC is converted by the DNS A default gateway is required when setting the IP addressWeb Browser Glossary 110Terminal Recording MechanismNormal Recording Disk Hard disk Event1 Event2 Event3 Event4 Event5 When ALL is selected When Alarm Lock is selectedSpace excluding alarm recording data When Alarm Stop is selected113 Presensor Recording Preset Values Actual Recording DurationSettings Presensor Recording When Event is selected When Time is selected When Alarm is selected Alarm or sensor recordingAudio Recording DurationRS-232C Connection Recording QualityChanging the Time Zone Timer ProgrammingPC environment settings Alarm list for mail notificationSpecifications VR-716E Digital Video Recorder