JVC VR-716E instruction manual Main Features, How to Use the Operation Lock

Page 5

Getting Started

Thank you for

purchasing this VR-716E

Digital Video Recorder.

In the subsequent sections of this manual, this equipment shall be referred to as VR-716.

Main Features

Built-in hard disk drive with a high capacity of 160 GB

Simultaneous recording of 400 images / sec in 16 channels

Recording up to 400 images/second.

Simultaneous Playback mode

Playback, jog/shuttle playback and skip play are possible during recording.

Monitor with display in quad or 16 split pictures

16-channel video input can be displayed in quad or 16 pictures at 25 images per second on the monitor.

Direct search on the screen

Searches quickly for the date/time and alarm position to invoke.

Recovery Recording during power out- age

Upon recovery from a power outage that oc- curred during recording, VR-716 will resume re- cording in the mode prior to the failure.

Timer Recording

Daily/Weekly timer recording up to 8 programs.

Alarm/Sensor Recording

Switches automatically to the Alarm Recording mode as set in the menu when alarm signals are received during recording.

Supports 16-channel asynchronous camera inputs

Simultaneous recording/playback of images in 16 asynchronous cameras.

Network-compatible

Recorded images can be viewed on LAN-con- nected computers.Titles and timer programs can also be set using computers.

Motion Detect

Automatically detects image motion within the specified area and starts alarm recording.

Digital Water Mark

Embeds data in images to protect data integrity against falsification and unauthorized detection during data replication.

Transmission of alarm e-mails

E-mails can be sent out to any computers dur- ing alarm (sensor) input.

How to Use the Operation Lock

VR-716 employs a secret operation lock system to prevent its power from being turned off by mistake or tampering with the record functions.When the operation lock is turned ON, the lock operation can be selected as either “ALL” or “STOP REC” from the menu.

☞Pg 25 ‘OPERATION LOCK’

 

[CANCEL]

 

 

[LOCK]

 

CANCEL SEARCH

MENU

HDD

OPERATE

 

 

 

 

REV

FWD

 

 

TIMER

 

 

LOCK

 

DISPLAY

EXECUTE

 

OUT

 

 

VIDEO AUDIO

SEQUENCE

REC STOP PLAY STILL

 

 

 

MULTI

 

 

 

 

 

 

SKIP

 

 

Front Display

[EXECUTE]

 

 

For security reasons, it is recommended that you detach this page and keep it separately.

⬛Turning On the Operation Lock

Press the [LOCK] and [EXECUTE] buttons simultaneously.

•This locks the operation immediately and keys are disabled. (However, this does not apply to control via Web brows- ers.)

•[LOCK] is indicated on the front display.

⬛Turning Off the Operation Lock

Press the [LOCK] and [CANCEL] buttons si- multaneously.

• This deactivates the operation lock.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Please read the followings before getting started VR-716EImportant In the United Kingdom Mains Supply AC 230 For Your Safety AustraliaConnection to the mains supply For Continental EUROPE, ETC. Not to be used in the U.KHandling the unit Place of storage and useConnecting to a Web Browser and Setting Up What is a Web Browser?Useful Browser Features Routine Uses of the Web BrowserHow to Use the Operation Lock Main FeaturesPrecautions Names and Functions Front @ Menu Button Timer Button# Cursor Control Buttons $ Search ButtonNames and Functions Rear Names and Functions Signal In/Out Terminal Terminal Signal Level Remarks Names and Functions Front Display 105 ‘Problems Related to Error Code and Onscreen Display’ Counter/Setting DisplayClock Display Example 123456, 1 March Remaining Hard Disk Space Display Example 1234 hours leftAlarm COM System Connection When Connecting 16 CamerasExample Audio VideoMounting to a Rack Turning On/Off the PowerOnscreen Setting Using the Monitor Screen Setting the Date/TimeTime Zone Setting Press the Menu button Select the Clock SET item using / and pressSelect the Clock SET item using Clock Setting Press the Menu buttonPress and turn the jog dial to adjust M Month Press Menu to end settingAdjust H Hour and M Minute Setting Using the Front DisplayPress the Display button for 2 seconds or longer Press the buttonOnscreen Display Menu Flow Chart Single Picture Mode Menu Program Timer MenuMotion Detect Setting Menu Weekly Timer MenuChanging Initial Settings Changing Menu SettingsSelect menu item using Turn the jog dial to select a valueSettings Description Onscreen Mode MenuAre factory settings FDP MenuBuzzer Menu REC Mode MenuEXT REC Menu Camera Title MenuOperation Menu Monitor Display Menu ALARM/SENSOR Mode Menu Timer ING ModeTimer Normal Motion Detect Setting Scene StandardSetting is disabled when in the Recording mode Program Timer MenuExec Date TimerStart Date M Month Start Date DNetwork Menu Disk UTILITY/MAINTENANCE Menu Displaying in the 16 Split Screen Mode When connecting the monitor to the EE OUT terminalViewing Live Camera Images EE OUT Terminal The following screen will be displayed on When connecting the monitor to the Video OUT terminalMonitor upon pressing the ‘Camera Selection’but TonsPress Sequence Multi to select the Single Picture mode Move the cursor to = Return using and pressPress to select a camera no Monitor display timePress Sequence Multi to select the Quad Picture mode Press to select a block under the Quad Picture Mode itemBlock Block 3SECRecording Camera Images Recording in the Normal ModePress the REC button Main menu items related to recordingTurn the jog dial to select the mode of repeat recording Repeat Recording Repeat Record FeaturePress to select Repeat REC item Repeat REC OFFViewing Recorded Images Monitor will display in quad picture Press the ‘Camera Selection’ buttonPress the ‘Camera Selection’ button again Searching Image According to Date/Time DATE/TIME Search Move the cursor to DATE/TIME Search using and pressTurn the jog dial to select a D Day value Press and turn the jog dial to select a M Month valueHow to clear the Alarm Record List Move the cursor to ALARM/SENSOR Search item using and pressWhen in the Playback mode Adjusting Playback Speed Jog/Shuttle Playback Turn the shuttle dial  Turn the jog dialPress to select the Skip Mode item Viewing Recorded Images in the Skip ModeTurn the jog dial to select a Skip mode Press the Skip button when in the Playback modePlayback the image Enlarging the Still Image Still Image ZoomPress the Still button Press and hold the Still button for a whileEach time the Still button is Scroll using the / / / buttonsPressed, x2 Zoom or x4 Zoom in both Vertical and horizontal directions canPress to select the line for which program is to be set Record Programming Using the Program TimerTurn the jog dial to adjust the starting day to FRI Friday This displays the Program Timer Menu screen Press Menu to return to the normal screen, and press TimerTo set the minute value of the ending Time, press Turn the jog dial to select DAYScreens Maximum duration of nonstop recording is less than 24 hours This displays the Program TimerPress to move the cursor to the final line Minute position and adjust by turning  Recording Mode Cameras 1= Return Cancelcancel Perform setting for other Date TimerPress To select the line9.10 Timer indicator on the front display lights upPress to select the record program to delete Canceling a Record ProgramChanging a Record Program Press the Menu button Press To selectScanning Hard Disk Data Auto Scan Disk Hard Disk MaintenancePress to select the Auto Scan Disk item Turn the jog dial to select onManual Scan Disk Press to select Manual Scan Disk itemThis starts the scanning Disk UTILITY/MAINTENANCE Menu and the Disk Utility Select the Defrag DA Tabase item using PressDefrag Press the Execute button againInitializing the Hard Disk Format Select the Format item Using PressThis displays the Format Confir Mation Screen FormatHard Disk Mirroring This displays the Power Outage Time List To view the list of Power Outage Recovery RecordsActivation of Recording Via External Signals Series Recording Using 2 or More VR-716 RecordersSetting ConnectionConnect the external hard disk drive and turn on the power Turn OFF the powerTurn on the power of VR-716 When connecting to multiple hard disk drivesThis displays the Confirm HDD Reconfiguring Screen Hard Disk Recovery FeaturePress the Operate button Hard disk drives are now usableCopying to DVD-RAM Select the DVD-RAM Copy item using and pressCopying to DVD-RAM Press Execute Select Copy Start usingPress the Execute button again RAMALARM/SENSOR Activation of Recording Via External Alarm/Sensor SignalsPress to select the Block item Types of Record ModesNotification During Alarm Recording or Sensor Recording Select the Motion Detect Setting item us- ing and press Using the Motion Detect FeatureTurn the jog dial to select a block Press and turn the jog dial to set a value for each itemSENSITIVITY, Termination Sensitiv How to set manuallyPress to move the cursor to Area SET- Ting Check mode Motion detect check mode and setting guidancePress to select the Recovery REC item Continuing with Recording Upon Recovery from Power FailureTurn the jog dial to select an operating mode Notification of Power OutageTurn the jog dial to set Block to Setting a Title for Each Camera Channel ScreenPress to select the Camera 1 Title item Turn the jog dial to select a characterLAN Terminal Backup of menu settingsYou can do the followings Other Cautions Minimum PC Specifications RequiredConnecting Login to the Network Setup FlowSet the IP Address Set the Netmask Set the Default Gateway Set the IP address Set the Subnet maskConnecting to a LAN Network Connecting Using a LAN CableConnecting to a Peer-to-peer Network What is peer-to-peer?Work Setting Up a Network for VR-716Press Button When Using Windows XP Click the button Setting Up a PC Network Windows XPExample Right-click on My Network Places and select PropertiesWhen Using Windows Click the button Setting Up a PC Network WindowsSelect Local Area Connection Right-click Local Area Connection and click PropertiesClick on the Local Area Connection Prop- erties screen Setting Up a PC Network Windows 2000/XPSelect Internet Protocol TCP/IP and click Enter the login password for VR-716 Connecting Login to the NetworkEnter the IP address factory setting Click Go Enter admin lower case Enter vr-716 lower case Click OKClick Save Click z Set the camera titleClick the Check box Enter characters Display Area in Program List for WeeklyTimer Record Program Using the Program Timer Setting ScreenClick z z SPE REC Speed QUL REC Quality AUD Audio RECSet to the Program Timer Standby mode Recording ModeREC Speed REC Speed REC Quality Audio RECPress UP to change and DEL to clear preset values Program List for Weekly TimerProgram List for Weekly Timer Example Execute recording from 800 a.m. ~ 500 p.m. everydayClick UP to update setting for the Program No. selected REC Speed Do not Record REC Quality Audio REC Program List for Date TimerTo undo the Timer Standby mode, click Setting VR-716 to the Program Timer Standby ModeClick Timer Mode ClickContinue Operation after Release Timer StopStop Click After ReleaseWeekly Timer Programs Click z z Changing/Deleting Record Programs in the Program TimerDate Timer Programs Click z z Weekly Timer SetupSearching Image According to Date/Time Event Search Searching Alarm/Sensor recording Click z zClick the button for the event to be viewed Selection items forTo view a particular event, click the button for that event Search By Date/Time Click z zDuration Channel Input date of the image to playbackAll Event REC Displays events of all re- cording data Search By Term Click z zThis opens up the Viewer window and starts playback.  Viewing the List of Registered Access Users Click z Restricting Access to VR-7162 user names below are included in the factory settings Click zShare Restricting Access to Recorded Image Files at VR-716Share WorkgroupChanging Network Settings of VR-716 from PC Select a Mode Mail Notification Setting During Alarm/Sensor InputServer Click Test E-MAILMessage Short List Format Mail HeaderMessage Normal List Format Viewing Images of Event Search Results Simple Viewer  Recording ModeSearch for an event  Names and FunctionsDisplays the operational status of the Web Viewer Switching between quad picture and single picture modes Functions Wait for a while for the backup data to be created Saving VR-716 Settings to a FileNOW Reading the Data SucceededSpecify a location on the PC for the data to be saved Click SaveDownload completed 102Specify the backup data file to upload from the PC Uploading VR-716 SettingsClick Update after specifying a backup data file Click ExecClick Open Information About Open Source Software104 Problems Related to Error Code and Onscreen Display TroubleshootingError Code Onscreen Display Cause Action Refer to106 Other ProblemsSymptom Cause Action Refer to 107 Troubleshooting on Use of BrowsersSymptom Cause Action 108 Troubleshooting on Use of Web BrowsersAuthentication Procedure 109 Other MessagesDisplayed Message Cause Action Web Browser Glossary A default gateway is required when setting the IP address110 IP addresses assigned by the PC is converted by the DNSNormal Recording Recording MechanismDisk Hard disk Event1 Event2 Event3 Event4 Event5 TerminalSpace excluding alarm recording data  When Alarm Lock is selected When Alarm Stop is selected  When ALL is selectedSettings Presensor Recording Preset Values Actual Recording DurationPresensor Recording 113 When Alarm is selected  When Time is selectedAlarm or sensor recording  When Event is selectedRS-232C Connection Recording DurationRecording Quality AudioPC environment settings Timer ProgrammingAlarm list for mail notification Changing the Time ZoneSpecifications VR-716E Digital Video Recorder
Top Page Image Contents