JVC VR-716E Click z Set the camera title, Click the Check box Enter characters, Click Save

Connecting to a PC – Routine Uses of the Web Browser –

Setting a Title for Each Camera Channel Screen

1. Click z

2. Set the camera title

1 Click the [Check] box.

2 Enter characters of

the camera title.

3 Click [SAVE].

Notes

•Up to 15 characters can be used when setting the camera title.

•Clicking [SAVE] with the field left blank will reset the camera title.

•Click [SAVE] to save the title at VR-716.

•Corrections cannot be made once [SAVE] is clicked. To make corrections, re-enter the title.

•Click [RESET] will restore the value on the main unit.

•When the [Camera **] under [Input No.] is displayed in orange, it indicates that the “Camera **” item under the “REC MODE” menu in the main menu is set to “OFF”.

Caution

•Camera title input is disabled if [Check] box is not clicked.

•Click [SAVE] only after all camera titles have been updated.

•Alteration of camera titles is not possible when VR-716 is in the Recording mode.

82