JVC VR-716E instruction manual Click UP to update setting for the Program No. selected

Page 86

Connecting to a PC – Routine Uses of the Web Browser – (continued) Record Program Using the Program Timer (Start recording on a specific day and time)

<Example> Execute recording from 9:30 a.m. ~ 10:30 p.m. on every Monday, Wednesday and Friday.

⬛Recording Mode

• [CAMERA] 1 - 4		• [CAMERA] 5 - 8		• [CAMERA] 9 - 12		• [CAMERA] 13 - 16
[REC SPEED]	: 12.5	[REC SPEED]	: 25	[REC SPEED]	: 2.5	[REC SPEED]	: 1/2
[REC QUALITY]	: [H]	[REC QUALITY]	: [N]	[REC QUALITY]	: [N]	[REC QUALITY]	: [B]
[AUDIO REC]	: [ON]	[AUDIO REC]	: [ON]	[AUDIO REC]	: [OFF]	[AUDIO REC]	: [OFF]

1. Click z z

1 Select the Program No..

2 Select the day/time for

recording to start and

end. Set [START DAY] to [DAY].

3 Select the [REC SPEED], [REC QUALITY] and [AUDIO REC] for each camera channel.

4 Select [ON].

5 Select [***] for setting other than [MON], [WED] and [FRI].

7 Click [SAVE].

6 Click [UP] to update setting for the Program No. selected in 1.

Program List for Weekly

Timer.

2. Set to the Program Timer Standby mode

☞Page 88 ‘Setting VR-716 to the Program Timer Standby Mode’

Notes

•[END] DAY cannot be set if [DAY] is se- lected for [START] DAY.

•Only [ON] or [OFF] can be selected under [EXEC] if [DAY] is selected for [START] DAY.

Caution

•Refer to the notes related to Summer Time. (☞ Page 116)

Notes

•[DAILY MODE] can be set when [DAY] is selected at [START] DAY. Select [***] for days for which recording is not to be ex- ecuted, followed by clicking [SAVE].

Program List for Weekly Timer

Press [UP] to change and [DEL] to clear preset values.

Be careful when [DAY] is selected for other Program Nos. As all record programs with [DAY] selected will be set at the same time.

•Click [SAVE] to save settings at VR-716.

•Click [RESET] when settings are incor- rectly entered. This restores the setting saved at the recorder.

•Upon clicking [SAVE], restoration of the original preset value will not be possible.

86

Image 86

Contents VR-716E Please read the followings before getting startedConnection to the mains supply For Your Safety AustraliaImportant In the United Kingdom Mains Supply AC 230 For Continental EUROPE, ETC. Not to be used in the U.KPlace of storage and use Handling the unitUseful Browser Features What is a Web Browser?Connecting to a Web Browser and Setting Up Routine Uses of the Web BrowserMain Features How to Use the Operation LockPrecautions Names and Functions Front # Cursor Control Buttons Timer Button@ Menu Button $ Search ButtonNames and Functions Rear Names and Functions Signal In/Out Terminal Terminal Signal Level Remarks Names and Functions Front Display Clock Display Example 123456, 1 March Counter/Setting Display105 ‘Problems Related to Error Code and Onscreen Display’ Remaining Hard Disk Space Display Example 1234 hours leftExample System Connection When Connecting 16 CamerasAlarm COM Audio VideoTurning On/Off the Power Mounting to a RackTime Zone Setting Press the Menu button Setting the Date/TimeOnscreen Setting Using the Monitor Screen Select the Clock SET item using / and pressPress and turn the jog dial to adjust M Month Clock Setting Press the Menu buttonSelect the Clock SET item using Press Menu to end settingPress the Display button for 2 seconds or longer Setting Using the Front DisplayAdjust H Hour and M Minute Press the buttonOnscreen Display Menu Flow Chart Motion Detect Setting Menu Program Timer MenuSingle Picture Mode Menu Weekly Timer MenuSelect menu item using Changing Menu SettingsChanging Initial Settings Turn the jog dial to select a valueAre factory settings Onscreen Mode MenuSettings Description FDP MenuREC Mode Menu Buzzer MenuEXT REC Menu Camera Title MenuOperation Menu Monitor Display Menu ALARM/SENSOR Mode Menu Timer Normal ING ModeTimer Motion Detect Setting Scene StandardProgram Timer Menu Setting is disabled when in the Recording modeStart Date M Date TimerExec Month Start Date DDisk UTILITY/MAINTENANCE Menu Network MenuViewing Live Camera Images When connecting the monitor to the EE OUT terminal Displaying in the 16 Split Screen Mode EE OUT TerminalMonitor upon pressing the ‘Camera Selection’but When connecting the monitor to the Video OUT terminal The following screen will be displayed on TonsPress to select a camera no Move the cursor to = Return using and pressPress Sequence Multi to select the Single Picture mode Monitor display timeBlock Press to select a block under the Quad Picture Mode itemPress Sequence Multi to select the Quad Picture mode Block 3SECPress the REC button Recording in the Normal ModeRecording Camera Images Main menu items related to recordingPress to select Repeat REC item Repeat Recording Repeat Record FeatureTurn the jog dial to select the mode of repeat recording Repeat REC OFFViewing Recorded Images Monitor will display in quad picture Press the ‘Camera Selection’ buttonPress the ‘Camera Selection’ button again Turn the jog dial to select a D Day value Move the cursor to DATE/TIME Search using and pressSearching Image According to Date/Time DATE/TIME Search Press and turn the jog dial to select a M Month valueMove the cursor to ALARM/SENSOR Search item using and press How to clear the Alarm Record List Turn the shuttle dial Adjusting Playback Speed Jog/Shuttle PlaybackWhen in the Playback mode Turn the jog dialTurn the jog dial to select a Skip mode Viewing Recorded Images in the Skip ModePress to select the Skip Mode item Press the Skip button when in the Playback modePress the Still button Enlarging the Still Image Still Image ZoomPlayback the image Press and hold the Still button for a whilePressed, x2 Zoom or x4 Zoom in both Scroll using the / / / buttonsEach time the Still button is Vertical and horizontal directions canPress to select the line for which program is to be set Record Programming Using the Program TimerTurn the jog dial to adjust the starting day to FRI Friday Press Menu to return to the normal screen, and press Timer This displays the Program Timer Menu screenTo set the minute value of the ending Time, press Turn the jog dial to select DAYScreens Maximum duration of nonstop recording is less than 24 hours This displays the Program TimerPress to move the cursor to the final line Recording Mode Cameras 1 Minute position and adjust by turning= Return Cancelcancel Press Date TimerPerform setting for other To select the lineTimer indicator on the front display lights up 9.10Changing a Record Program Press the Menu button Canceling a Record ProgramPress to select the record program to delete Press To selectPress to select the Auto Scan Disk item Hard Disk MaintenanceScanning Hard Disk Data Auto Scan Disk Turn the jog dial to select onManual Scan Disk Press to select Manual Scan Disk itemThis starts the scanning Defrag Select the Defrag DA Tabase item using PressDisk UTILITY/MAINTENANCE Menu and the Disk Utility Press the Execute button againThis displays the Format Confir Mation Screen Select the Format item Using PressInitializing the Hard Disk Format FormatHard Disk Mirroring To view the list of Power Outage Recovery Records This displays the Power Outage Time ListSetting Series Recording Using 2 or More VR-716 RecordersActivation of Recording Via External Signals ConnectionTurn on the power of VR-716 Turn OFF the powerConnect the external hard disk drive and turn on the power When connecting to multiple hard disk drivesPress the Operate button Hard Disk Recovery FeatureThis displays the Confirm HDD Reconfiguring Screen Hard disk drives are now usableCopying to DVD-RAM Select the DVD-RAM Copy item using and pressCopying to DVD-RAM Press the Execute button again Select Copy Start usingPress Execute RAMPress to select the Block item Activation of Recording Via External Alarm/Sensor SignalsALARM/SENSOR Types of Record ModesNotification During Alarm Recording or Sensor Recording Turn the jog dial to select a block Using the Motion Detect FeatureSelect the Motion Detect Setting item us- ing and press Press and turn the jog dial to set a value for each itemSENSITIVITY, Termination Sensitiv How to set manuallyPress to move the cursor to Area SET- Ting Motion detect check mode and setting guidance Check modeTurn the jog dial to select an operating mode Continuing with Recording Upon Recovery from Power FailurePress to select the Recovery REC item Notification of Power OutagePress to select the Camera 1 Title item Setting a Title for Each Camera Channel ScreenTurn the jog dial to set Block to Turn the jog dial to select a characterLAN Terminal Backup of menu settingsYou can do the followings Minimum PC Specifications Required Other CautionsSet the IP Address Set the Netmask Set the Default Gateway Setup FlowConnecting Login to the Network Set the IP address Set the Subnet maskConnecting to a Peer-to-peer Network Connecting Using a LAN CableConnecting to a LAN Network What is peer-to-peer?Work Setting Up a Network for VR-716Press Button Example Setting Up a PC Network Windows XPWhen Using Windows XP Click the button Right-click on My Network Places and select PropertiesSelect Local Area Connection Setting Up a PC Network WindowsWhen Using Windows Click the button Right-click Local Area Connection and click PropertiesClick on the Local Area Connection Prop- erties screen Setting Up a PC Network Windows 2000/XPSelect Internet Protocol TCP/IP and click Enter the IP address factory setting Click Go Connecting Login to the NetworkEnter the login password for VR-716 Enter admin lower case Enter vr-716 lower case Click OKClick Save Click z Set the camera titleClick the Check box Enter characters Click z z Record Program Using the Program Timer Setting ScreenDisplay Area in Program List for WeeklyTimer SPE REC Speed QUL REC Quality AUD Audio RECREC Speed Recording ModeSet to the Program Timer Standby mode REC Speed REC Quality Audio RECProgram List for Weekly Timer Program List for Weekly TimerPress UP to change and DEL to clear preset values Example Execute recording from 800 a.m. ~ 500 p.m. everydayClick UP to update setting for the Program No. selected Program List for Date Timer REC Speed Do not Record REC Quality Audio RECClick Timer Mode Setting VR-716 to the Program Timer Standby ModeTo undo the Timer Standby mode, click ClickStop Operation after Release Timer StopContinue Click After ReleaseDate Timer Programs Click z z Changing/Deleting Record Programs in the Program TimerWeekly Timer Programs Click z z Weekly Timer SetupClick the button for the event to be viewed Searching Alarm/Sensor recording Click z zSearching Image According to Date/Time Event Search Selection items forDuration Channel Search By Date/Time Click z zTo view a particular event, click the button for that event Input date of the image to playbackAll Event REC Displays events of all re- cording data Search By Term Click z zThis opens up the Viewer window and starts playback. 2 user names below are included in the factory settings Restricting Access to VR-716 Viewing the List of Registered Access Users Click z Click zShare Restricting Access to Recorded Image Files at VR-716Share WorkgroupChanging Network Settings of VR-716 from PC Server Mail Notification Setting During Alarm/Sensor InputSelect a Mode Click Test E-MAILMessage Short List Format Mail HeaderMessage Normal List Format Search for an event Recording ModeViewing Images of Event Search Results Simple Viewer Names and FunctionsDisplays the operational status of the Web Viewer Switching between quad picture and single picture modes Functions NOW Reading the Data Saving VR-716 Settings to a FileWait for a while for the backup data to be created SucceededDownload completed Click SaveSpecify a location on the PC for the data to be saved 102Click Update after specifying a backup data file Uploading VR-716 SettingsSpecify the backup data file to upload from the PC Click ExecClick Open Information About Open Source Software104 Error Code Onscreen Display Cause Action TroubleshootingProblems Related to Error Code and Onscreen Display Refer to106 Other ProblemsSymptom Cause Action Refer to 107 Troubleshooting on Use of BrowsersSymptom Cause Action 108 Troubleshooting on Use of Web BrowsersAuthentication Procedure 109 Other MessagesDisplayed Message Cause Action 110 A default gateway is required when setting the IP addressWeb Browser Glossary IP addresses assigned by the PC is converted by the DNSDisk Hard disk Event1 Event2 Event3 Event4 Event5 Recording MechanismNormal Recording Terminal When Alarm Stop is selected When Alarm Lock is selectedSpace excluding alarm recording data When ALL is selectedPresensor Recording Presensor Recording Preset Values Actual Recording DurationSettings 113Alarm or sensor recording When Time is selected When Alarm is selected When Event is selectedRecording Quality Recording DurationRS-232C Connection AudioAlarm list for mail notification Timer ProgrammingPC environment settings Changing the Time ZoneSpecifications VR-716E Digital Video Recorder