JVC XL-R910SL Selecting Playback Modes, Programming the Playing Order of the Tracks Program Play

Selecting Playback Modes

English

PROGRAM				4 / 1	0		3	7
				¢ / `
PROGRAM	SET	CLEAR		COMPACT DISC RECORDER	XL-R910
POWER
_ON/ ÑOFF
			AUTO			REC	REC LEVEL
		REPEAT	TRACK		FINALIZE PAUSE		REC
POWER
_ON/ ÑOFF					REC		DIGITAL
		RANDOM	DISPLAY		SOURCE	ERASE SYNCHRO
POWER = _ ON							MIN	MAX
RANDOM				CLEAR

Programming the Playing Order of the Tracks — Program Play

You can arrange the order in which tracks play before you start playing. You can program up to 30 tracks.

1Load a disc.

2Press PROGRAM so that the unit enters program mode.

PROGRAM

3Press ¢/ `(or 4/ 1) to select a track, then press PROGRAM again.

To exit from program play mode, press 7again or CLEAR before or after play. The PROGRAM indicator goes off. The program you

have made is also erased.

• When you press 0, the program is also erased.

Note:

The display cannot show the hundred digit even if the total playing time exceeds 100 minutes. (e.g. “105:00” will be shown as “05:00.”)

To confirm the program contents

Before playing, you can check the program contents by pressing PROGRAM repeatedly.

The programed tracks will be shown on the display in the programed order.

Track number

Step number in the program (“C” stands for “Confirm.”)

PROGRAM

Ex.: Track 3 is stored into program step 1.

4

5

Repeat the above step to program other tracks.

Press 3.

The tracks are played in the order you have programed.

To stop playing, press 7.

9