JVC XL-R910SL manual Specifications, CDR section, General

Page 21

Specifications

CDR section

System:

Compact disc digital audio recording system

Sampling frequency:

44.1 kHz

Signal-to-noise ratio:

90 dB

Dynamic range:

90 dB

Frequency response:

20 Hz to 20 kHz

Wow and flutter:

Less than measurable limit

Total harmonic distortion: 0.01%

Input:

 

ANALOG IN:

Minimum input level: 300 mV

 

(Full scale –12 dB)/47 Ωk

OPTICAL IN:

Input level: –23 dBm to –15 dBm

 

(with sampling rate 32 kHz, 44.1 kHz, 48 kHz)

Output:

 

ANALOG OUT:

2V/50 kΩ (Full scale)

 

(Full scale –12 dB)/50 Ωk

OPTICAL OUT:

Output level: –21 dBm to –15 dBm

 

(with sampling rate 44.1 kHz)

COAXIAL OUT:

0.5 Vp-p/75 Ω

General

Power requirement:

AC 120 V , 60 Hz

Power consumption:

20 W

Dimensions (approx.):

270 mm x 95 mm x 353 mm (W/H/D)

 

(10 11/16 in. x 3 3/4 in. x 13 15/16 in.)

Mass (approx.):

3.8 kg (8.4 lbs)

Supplied accessories

 

See page 5.

 

Design and specifications are subject to change without notice.

English

18

Page 20 Page 22
Image 21
Page 20 Page 22
Contents XL-R910SL Précaution interrupteur Power For Canada/pour Le Canada Table of Contents Before Installation Before Operating the UnitAbout Discs and Their Logos Location of the Buttons and Controls Remote ControlFront Panel Display WindowCD, CD-R, CD-RW Putting Batteries in the Remote Control Checking the Supplied AccessoriesConnecting the Unit Getting StartedXL-R910SL Turn the power off to all components before connectionsPlaying Back a Disc Turn On the PowerStart Playback Load a DiscBasic Playback Operations Selecting Playback Modes To confirm the program contentsProgramming the Playing Order of the Tracks Program Play Repeat the above step to program other tracks PressPlaying at Random Random Play Press Random so that the unit enters random modeLoad a disc To modify the programRecording on a CD-R/CD-RW Using Automatic Tracking while Digital RecordingBefore You Start Recording To put a track mark manually while recording, pressStart Recording Load a Recordable Disc and Prepare Playback SourceSelect the Recording Source Input Press REC SourceOther Recording Functions Indicator lights upLoad a recordable disc and prepare the playback source Start playback on the playback componentPress SET to finalize the disc Finalizing a Disc CD-R/CD-RWPress SET to unfinalize the disc Erasing the Tracks on a CD-RWGlossary Additional InformationHandling Discs MaintenanceSymptom Cause Action TroubleshootingSpecifications CDR sectionGeneral EN, FR 0301KSMMDWSAM
Top Page Image Contents