JVC XL-R910SL manual Before Operating the Unit, About Discs and Their Logos, Before Installation

Page 5

Before Operating the Unit

Thank you for purchasing this JVC product. Please read these

About Discs and Their Logos

instructions thoroughly and carefully before starting operation to

ensure that you will derive the optimum performance and a long

Recording

service life from your unit.

English

Before Installation

General Precautions

•DO NOT insert any metal object into the unit.

•DO NOT disassemble the unit or remove screws, covers, or cabinet.

•DO NOT modify the power cord in any way.

•DO NOT bend the cord at a sharp angle, and do not pull or twist it.

•DO NOT expose the unit to rain or moisture.

Locations

•Install the unit in a location that is level and protected from moisture.

•The temperature around the unit must be between 41˚F and 95˚F (5˚C and 35˚C).

•Make sure there is good ventilation around the unit. Poor ventilation could cause overheating and damage the unit.

•Avoid placing the unit on or adjacent to an amplifier. This is to prevent the humming caused by the unit’s proximity to some types of amplifiers. Move the unit where it will not be affected by the amplifier.

Handling the unit

•DO NOT touch the power cord with wet hands.

•DO NOT pull on the power cord to unplug the cord. When unplugging the cord, always grasp the plug so as not to damage the cord.

•If the power cord is damaged, consult your dealer.

This unit has been designed to record on the discs bearing the following logos:

CD Recordable

CD Rewritable

In addition to the logos shown above, the phrases shown below or their equivalent should also be indicated somewhere on the package or accompanying documentation.

•For Customer Use

•For Music Use

The following discs cannot be used for recording:

•Discs bearing logos other than the above.

•Discs intended for professional use.

•Discs intended for recording computer data.

Playback

This unit has been also designed to play back on the discs bearing the following logos:

CD Recordable

CD Rewritable

Audio CD

In addition to the above discs, this unit can play back audio data recorded on CD-G (CD Graphics), CD-EXTRA, and CD-Text discs.

Note:

This unit can playback a CD-R or CD-RW recorded on a personal computer only if it has been recorded in the CD audio format.

2

Page 4 Page 6
Image 5
Page 4 Page 6
Contents XL-R910SL Précaution interrupteur Power For Canada/pour Le Canada Table of Contents About Discs and Their Logos Before InstallationBefore Operating the Unit Location of the Buttons and Controls Remote ControlFront Panel Display WindowCD, CD-R, CD-RW Putting Batteries in the Remote Control Checking the Supplied AccessoriesConnecting the Unit Getting StartedXL-R910SL Turn the power off to all components before connectionsPlaying Back a Disc Turn On the PowerStart Playback Load a DiscBasic Playback Operations Selecting Playback Modes To confirm the program contentsProgramming the Playing Order of the Tracks Program Play Repeat the above step to program other tracks PressPlaying at Random Random Play Press Random so that the unit enters random modeLoad a disc To modify the programRecording on a CD-R/CD-RW Using Automatic Tracking while Digital RecordingBefore You Start Recording To put a track mark manually while recording, pressStart Recording Load a Recordable Disc and Prepare Playback SourceSelect the Recording Source Input Press REC SourceOther Recording Functions Indicator lights upLoad a recordable disc and prepare the playback source Start playback on the playback componentPress SET to finalize the disc Finalizing a Disc CD-R/CD-RWPress SET to unfinalize the disc Erasing the Tracks on a CD-RWGlossary Additional InformationHandling Discs MaintenanceSymptom Cause Action TroubleshootingGeneral SpecificationsCDR section EN, FR 0301KSMMDWSAM
Top Page Image Contents