Finalizing a Disc CD-R/CD-RW | JVC XL-R910SL specification

Finalizing a Disc — CD-R/CD-RW	Remote
	NOT

Finalization is the final process in recording on a CD-R or CD-RW. “Finalizing a disc” means to finish writing the TOC (Table of Contents) on the recorded disc. Only after this process is completed, a recorded CD-R or CD-RW can be played back on a CD player compatible with CD-R/CD-RW.

IMPORTANT

•Once a CD-R has been finalized, no more recording can be made on the disc.

•If you unplug the power cord or if a power failure occurs during finalization process, recorded data will be lost and the disc may not be utilized any more.

1Press FINALIZE while a disc you want to finalize

is placed on the disc tray.

“FINALIZE?” appears on the display.

FINALIZE

• If you want to cancel finalization, press CLEAR.

2Press SET to finalize the disc.

The FINALIZE indicator starts flashing on the

SET

display.

The finalization process requires about a few minutes to complete (when finalized, the FINALIZE indicator stops flashing and remains lit).

Unfinalizing a Disc — CD-RW	Remote
	NOT

Once a CD-R has been finalized, no more recording will be made on the disc. However, by erasing the TOC (Table of Contents), you can record on a recorded CD-RW. This erasing process of the TOC is called “Unfinalization.”

•Unfinalization is just to erase the TOC only, but not the recorded music signals on the disc.

1Press REC PAUSE while a disc you want to

unfinalize is placed on the disc tray.

“UN FINAL?” appears on the display.

REC

PAUSE

• If you want to cancel unfinalization, press CLEAR.

2Press SET to unfinalize the disc.

SET	The FINALIZE indicator starts flashing on the
	display.
	The unfinalization process requires about a few
	minutes to complete (when unfinalized, the
	FINALIZE indicator goes off).

Erasing the Tracks on a CD-RW	Remote
	NOT

You can erase a track or all the tracks on a CD-RW.

•One-track erasure: You can erase the last track.

•Disc erasure: You can erase all the tracks at once.

One-track Erasure

1Load a disc — either a finalized or unfinalized CD-RW.

•If the disc is already finalized, first unfinalize the disc. See “Unfinalizing a Disc — CD-RW” on the left column.

2Press ERASE repeatedly so that “TRACK ?” appears on the display.

•Each time you press the button, the display alternately shows “TRACK ?” and “DISC ?.”

ERASE

To cancel the erasure, press 7.

3 Press SET.

SET	The ERASE indicator starts flashing and the last
	recorded track is erased.

4 Repeat steps 2 and 3 to erase the other tracks.

Disc Erasure