Playing at Random Random Play, Load a disc

To modify the program

While confirming, you can change the track numbers in the program.

Example: To change the track number (from “18” to “6”) programed in program step 4

1Press PROGRAM repeatedly until the contents of program step 4 appears on the display.

PROGRAM

2Press ¢/ `(or 4/ 1) to select a new track number, then press PROGRAM again.

•If you want to erase the track from your program, press CLEAR. (In this case, you can see no change on display.)

To add tracks in the program before playing, press PROGRAM repeatedly until the unit enters program play mode.

(“– –” under the TRACK indicator will start flashing on the display), then select the track numbers by following step 3 of the programming procedure (on the previous page).

Playing at Random — Random Play

The tracks will play at random.

1Load a disc.

•If the unit is in program play mode (the PROGRAM indicator is lit on the display), you cannot go to the next step. If this happens, press 7 to exit from program play mode.

2Press RANDOM so that the unit enters random mode.

RANDOM	The RANDOM indicator lights up on the
	display.
	The tracks are played at random.

Random play ends when all the tracks are played once.

To skip the currently playing track, press ¢/ `

(or 4 / 1).

•You cannot go back to the previous tracks during random play even if you press 4/ 1.

To stop playing, press 7.

• Random play mode is also canceled when you press 0.

To exit from random play mode, press RANDOM again.

•Each time you press the button, random playback mode turns on and off.

Notes:

•You can turn on random playback mode during normal play.

•You cannot repeat random play. If you press REPEAT during random play, random playback mode is canceled and normal play resumes.

English