JVC DR-MH20B Still Picture/Frame-By-Frame Playback, Slow Motion, Skip Search, To mark positions

Filename [DR-MH30EU_05DVD Operation.fm]
DR-MH30EU_00.book Page 29 Thursday, June 3, 2004 11:00 AM	Masterpage:Right+
	BASIC OPERATIONS ON DVD DECK EN 29

Still Picture/Frame-By-Frame Playback		NOTES:
		● “DISC RESUME” setting works on DVD VIDEO, VCD, SVCD and
		already finalised DVD-R/DVD-RW (video mode) discs. For other
		types of discs, the function under “ON” setting will be applied even if
		“RESUME” is set to “DISC RESUME”. ( pg. 70)
1 Press 9 to pause during playback.
		● If you stop the playback of a disc for which a resume point has
2 Press SLOW – (3) or SLOW + (5) to activate frame-by-		already been memorized, the memory will be updated with the new
		resume point.
frame playback.		● After the unit has memorized the resume points for 30 discs,
● Each press of SLOW – (3) or SLOW + (5) advances/reverses		remembering a new resume point will cause the unit to delete the
the still picture frame by frame.		oldest memorized point. Stopping playback of a disc for which a
● Frame-by-frame playback for reverse direction cannot be performed		resume point is already stored may change the order in which the
with Video CD/SVCD discs.		points are stored. This may potentially change the order in which
● To resume normal playback, press 4.		points are deleted.
Slow Motion		● When the unit memorizes a resume point for a disc, it also
		remembers audio language, subtitle and angle settings.
		● This function may not work for some Video CD/SVCDs.
		● When “RESUME” is changed to “ON” or “OFF” ( pg. 70), resume
		points of the discs memorized with “RESUME” set to “DISC
		RESUME” will be cleared.
1 Press 9 to pause during playback.
		● Resume points are memorized for each side of a double-sided disc.
2 Press SLOW – (3) or SLOW + (5) for 2 or more seconds.		Marking Positions To Play Back Again Later
● Each press of SLOW – (3) or SLOW + (5) increases the slow
motion speed for each direction (from 1/16 to 1/2 times the normal
speed).
● Slow motion for reverse direction cannot be performed with Video
CD/SVCD discs.
		It is possible to mark positions (up to 999 points) where you want to
Skip Search		play back once again later, and start playback from a marked
		position. Marking onto DVD-RAM/RW/R discs when recording is
		helpful to locate a start point when you play back the discs later.
		To mark positions:
		During playback, press MARK at
During playback, press	.
		positions you want to mark.
● Each press initiates an approximately 30-second period of fast-		● “MARK” appears on the TV screen.
motion playback. Normal playback resumes automatically.		You can easily locate the marked
Resume Function		positions using 2 or 6 when you
		play back the disc.
		To delete the marked positions:
		While paused, press 2 or 6 to
		locate a marked position you want to
		delete, then press MARK.
It is possible to memorize the position where you stop playback
		● Crossed “MARK” appears on the TV
and resume playback from that position.
		screen, and the marked position is
● Be sure to set “RESUME” to “ON” or “DISC RESUME”. ( pg. 70)
		deleted.
1 Press 8 during playback to memorize a resume point.
		NOTES:
● The unit enters Resume Stop mode and memorizes the position
		● When a monaural programme changes to a stereo programme while
where you have stopped playback as a resume point. (The inside of
		recording, a mark signal is automatically recorded.
the disc status indicator on the front display panel blinks while
		● When a DVD-R/RW (Video mode) disc is finalised, marked points
memorising.)
		marked before finalising will be deleted, and programmes will be
● The unit retains a memory of the resume points of the last 30 discs
		divided automatically into “chapters” approximately every 5 minutes.
played back, even though they have been ejected if “RESUME” is set
		( pg. 77)
to “DISC RESUME”. ( pg. 70)

●To clear the resume points:

(The inside of the disc status indicator stops blinking and lights.)

When “RESUME” is set to “ON”:

•Press 1 to turn off the unit.

•Press x to take out the disc.

•Press 8 in stop mode.

•Press TOP MENU to display the top menu, then start playback by selecting an item, etc.

•Press MENU to display the disc menu, then start playback by selecting an item, etc.

When “RESUME” is set to “DISC RESUME”:

•Set “RESUME” to “OFF”. ( pg. 70)

•Press 8 in stop mode.

•Press TOP MENU to display the top menu, then start playback by selecting an item, etc.

•Press MENU to display the disc menu, then start playback by selecting an item, etc.

2 Press 4 in stop mode to resume playback. The unit starts playback from the resume point.

Page 29

Thursday, 3 June 2004 10:46